The Iron Ring is a ring worn by many Canadian engineers. Obtaining the ring is an optional endeavour – the ring is not a prerequisite for practising professional engineering in Canada.
The Ring is given as part of "The Ritual of the Calling of an Engineer",[1] written by Rudyard Kipling. Many believe that the rings are made from the steel of a beam from the Quebec Bridge, which collapsed during construction in 1907, killing 75 construction workers, due to poor planning and design by the overseeing engineers; however, this is not the case.[citation needed] This misunderstanding may have its roots in a common practice of attaching a symbol of an engineering failure, such as a bolt from that bridge, to the chain that is held by participants in the ritual. There are however some engineers who do possess rings made of material from that bridge but their rarity is unknown. The Ring itself is a symbol of both pride and humility for the engineering profession.
The Ring is worn on the little finger of the working hand, where the facets act as a sharp reminder of obligation while the engineer works. This is particularly true of recently obligated engineers, whose rings still bear facets nearly sharp enough to be considered serrations.
The Iron Ring was originally made from iron, but graduating engineering students are now usually given stainless steel rings, which do not rust. Only Camp 1 (which includes the University of Toronto, Ryerson University, York University and the UOIT) continues to provide the option of iron. Protocol dictates that the rings should be returned by retired engineers or by the families of deceased engineers. Some camps offer such iron rings or so obligated "experienced" rings, but they are now rare due to both medical and practical (industrial/construction site) complications.
The Ring itself is small and understated, designed as a constant reminder rather than a piece of jewelry. The Rings were originally hammered manually with a rough outer surface to further dispel the notion of them being worn as a trinket. The modern machined ring design emulates this manual process with a unique pattern. Twelve half-circle facets are carved into the top and bottom of the outer surface, with the two halves offset by one facet radius. To an untrained eye this appears to be manually hammered.
The Ritual of the Calling of an Engineer
Issued on April 25 2000.
The Ritual of the Calling of an Engineer is the ceremony where Iron Rings are given to graduating engineers who choose to obligate themselves to the highest professionalism and humility of their profession. It is a symbol that reflects the moral, ethical and professional commitment made by the engineer who wears the ring. The ceremonies are private affairs with no publicity. Invitations to attend are extended to local engineering alumni and professional engineers by those who are scheduled to participate. For some schools, the invitation to witness the ceremony is open to anyone in the engineering profession, and non-obligated engineers may not participate in the ritual. For other schools, the invitation to witness the ceremony is open to everyone. Some graduating engineers choose to receive a ring passed on from a relative or mentor, giving the ceremony a personal touch.
Although the details of the ceremony are not secret, they are considered sacrosanct and obligated engineers normally do not discuss the ceremony, even with engineering students.
The word "camp" is used to describe these regional organizations because it conveys a smaller, close-knit sense of community.
History of the ritual
The first ceremony was held at Camp 1, Toronto, on April 25, 1925. At the request of Herbert Haultain, The Engineering Institute of Canada agreed there should be a ceremony or a standard of ethics that should be developed for graduating engineers. They requested the assistance of Rudyard Kipling for the development of a suitable ceremony or ritual.
Iron Rings in other countries
Based upon the success of the Iron Ring in Canada, similar programs have started in other countries. For example, in the United States, the Order of the Engineer[1] was founded in 1970, and conducts similar ring ceremonies at a number of U.S. colleges, in which the recipient signs an "Obligation of the Engineer" and receives a stainless steel Engineer's Ring (which, unlike the Canadian Iron Ring, is smooth and not faceted).
Camps and Associated Universities
Camp #1 Toronto
- Ryerson University
- University of Ontario Institute of Technology [UOIT]
- University of Toronto
- York University
Camp #2 Montréal
- McGill University
- Concordia University
- Université du Québec en Abitibi-Témiscamingue
- École Polytechnique de Montreal
- École de Technologie Supérieure
- Université du Québec à Montréal
Camp #3 Kingston
- Queen's University
- Royal Military College of Canada
Camp #4 Saskatoon
- University of Saskatchewan
Camp #5 Vancouver
- University of British Columbia
- Simon Fraser University
- BCIT
Camp #6 Edmonton
Camp #7 Halifax
- Dalhousie University
Camp #8 Winnipeg
- University of Manitoba
Camp #9 Fredericton
- University of New Brunswick
Camp #10 Québec
- Université Laval
- Université du Québec à Chicoutimi
- Université du Québec à Rimouski
Camp #11 London
Camp #12 Ottawa
- Carleton University
- University of Ottawa
- Université du Québec en Outaouias
Camp #13 Hamilton
Camp #14 Windsor
Camp #15 Waterloo
Camp #16 Sherbrooke
- Université de Sherbrooke
Camp #17 Guelph
- University of Guelph
Camp #18 Calgary
- University of Calgary
Camp #19 Moncton
- Université de Moncton
Camp #20 St. John's (NL)
- Memorial University
Camp #21 Thunder Bay
- Lakehead University
Camp #22 Sudbury
- Laurentian University
Camp #23 Victoria
- University of Victoria
Camp #24 Trois-Rivières
- Université du Québec à Trois-Rivières
Camp #25 Regina
- University of Regina
See also
References
External links
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
