Microphonics

This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (November 2009)

Microphonics describes the phenomenon where certain components in electronic devices transform mechanical vibrations into an undesired electrical signal (noise). The term is derived by analogy to microphones where that behavior is inherent in the design, while with modern electronics it is sometimes an intentionally added effect but usually undesired.

When electronic equipment was built using vacuum tubes, microphonics were often a serious design problem. The charged elements in the vacuum tubes can vibrate and the motion would change the distance between the elements, producing charge flows in and out of the tube in a manner identical to a capacitor microphone. A system sufficiently susceptible to microphonics could experience feedback. Certain models or grades of vacuum tubes were made with thicker internal insulating plates to minimize these effects.^[1]

With the advent of solid state electronics (transistors), this major source of microphonics was eliminated but smaller sources still remain. The ceramic EIA Class 2 dielectrics used in high-K capacitors ("Z5U" and "X7R") are piezoelectric and will directly transform mechanical vibration into a voltage in exactly the same fashion as a ceramic microphone ^[2] does. Film capacitors using soft dielectric materials can also be microphonic due to vibrational energy physically moving the plates of the capacitor. Wiring and cables can also exhibit microphonics as charged conductors move around, and various materials can develop triboelectric ("static") charges that couple to the electronic circuits. Glass capacitors, while quite expensive, are essentially nonmicrophonic.

The sound of guitar amplifiers that incorporate the electronic chassis into the same cabinet as the speaker are susceptible to microphonics. Though a guitar amplifier's microphonics distortion is sometimes appreciated as part of the "special sound" of a guitar amplifier, a faulty vacuum tube or other component can cause out of control feedback. Unwanted microphonics-related audible distortions can often be alleviated by using commercially available vacuum tube dampers.

Other uses

Audio vacuum tube with microphonics damper

• The term is sometimes used to describe the sounds physically produced by mechanical vibrations or knocks on the wires of a headphone or in-ear monitor, where no current induction occurs. [2]

See also

• Ringing (signal)

References

External links

• Valve Microphonics

This technology-related article is a stub. You can help Wikipedia by expanding it. v • d • e