Petroleum geology

This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (April 2007)

Petroleum geology refers to the specific set of geological disciplines that are applied to the search for hydrocarbons (oil exploration).

Sedimentary basin analysis

Petroleum geology is principally concerned with the evaluation of seven key elements in sedimentary basins:

A structural trap, where a fault has juxtaposed a porous and permeable reservoir against an impermeable seal. Oil (shown in red) accumulates against the seal, to the depth of the base of the seal. Any further oil migrating in from the source will escape to the surface and seep.

• Source
• Reservoir
• Seal
• Trap
• Timing
• Maturation
• Migration

In general, all these elements must be assessed via a limited 'window' into the subsurface world, provided by one (or possibly more) exploration wells. These wells present only a 1-dimensional segment through the Earth and the skill of inferring 3-dimensional characteristics from them is one of the most fundamental in petroleum geology. Recently, the availability of cheap and high quality 3D seismic data (from reflection seismology) has greatly aided the accuracy of such interpretation. The following section discusses these elements in brief. For a more in-depth treatise, see the second half of this article below.

Evaluation of the source uses the methods of geochemistry to quantify the nature of organic-rich rocks which contain the precursors to hydrocarbons, such that the type and quality of expelled hydrocarbon can be assessed.

The reservoir is a porous and permeable lithological unit or set of units that holds the hydrocarbon reserves. Analysis of reservoirs at the simplest level requires an assessment of their porosity (to calculate the volume of in situ hydrocarbons) and their permeability (to calculate how easily hydrocarbons will flow out of them). Some of the key disciplines used in reservoir analysis are the fields of stratigraphy, sedimentology, and reservoir engineering.

The seal, or cap rock, is a unit with low permeability that impedes the escape of hydrocarbons from the reservoir rock. Common seals include evaporites, chalks and shales. Analysis of seals involves assessment of their thickness and extent, such that their effectiveness can be quantified.

The trap is the stratigraphic or structural feature that ensures the juxtaposition of reservoir and seal such that hydrocarbons remain trapped in the subsurface, rather than escaping (due to their natural buoyancy) and being lost.

Analysis of maturation involves assessing the thermal history of the source rock in order to make predictions of the amount and timing of hydrocarbon generation and expulsion.

Finally, careful studies of migration reveal information on how hydrocarbons move from source to reservoir and help quantify the source (or kitchen) of hydrocarbons in a particular area.

Major subdisciplines in petroleum geology

Several major subdisciplines exist in petroleum geology specifically to study the seven key elements discussed above.

Analysis of source rocks

In terms of source rock analysis, several facts need to be established. Firstly, the question of whether there actually is any source rock in the area must be answered. Delineation and identification of potential source rocks depends on studies of the local stratigraphy, palaeogeography and sedimentology to determine the likelihood of organic-rich sediments having been deposited in the past.

If the likelihood of there being a source rock is thought to be high, the next matter to address is the state of thermal maturity of the source, and the timing of maturation. Maturation of source rocks (see diagenesis and fossil fuels) depends strongly on temperature, such that the majority of oil generation occurs in the 60° to 120°C range. Gas generation starts at similar temperatures, but may continue up beyond this range, perhaps as high as 200°C. In order to determine the likelihood of oil/gas generation, therefore, the thermal history of the source rock must be calculated. This is performed with a combination of geochemical analysis of the source rock (to determine the type of kerogens present and their maturation characteristics) and basin modelling methods, such as back-stripping, to model the thermal gradient in the sedimentary column.

Analysis of reservoir

The existence of a reservoir rock (typically, sandstones and fractured limestones) is determined through a combination of regional studies (i.e. analysis of other wells in the area), stratigraphy and sedimentology (to quantify the pattern and extent of sedimentation) and seismic interpretation. Once a possible hydrocarbon reservoir is identified, the key physical characteristics of a reservoir that are of interest to a hydrocarbon explorationist are its porosity and permeability. Traditionally, these were determined through the study of hand specimens, contiguous parts of the reservoir that outcrop at the surface and by the technique of formation evaluation using wireline tools passed down the well itself. Modern advances in seismic data acquisition and processing have meant that seismic attributes of subsurface rocks are readily available and can be used to infer physical/sedimentary properties of the rocks themselves.

See also

• Bituminous rocks
• Burford v. Sun Oil Co.
• Controlled source electro-magnetic
• Fred Meissner (petroleum geologist)
• Geodestinies
• Important publications in petroleum geology

External links

• Oil On My Shoes -- Web site devoted to the science and practical application of Petroleum Geology

v • d • e The petroleum industry Exploration Petroleum engineering (Reservoir simulation · Seismic to simulation) · Petroleum geology · Geophysics · Seismic (Seismic inversion) · Petrophysics · Core sampling Drilling Drilling engineering · Underbalanced drilling · Directional drilling · (Measurement while drilling · Geosteering) · Drilling fluid · Drill Stem Test Development Completion (Squeeze job) · Well logging · Pipeline transport · Tracers Production Artificial lift (Pumpjack · ESP · Gas lift) · EOR (Steam injection · Gas reinjection)  · Water injection · Well intervention · Upstream · Midstream · Downstream Technical challenges Differential sticking, Drilling fluid invasion, Blowouts, Lost circulation Oil and gas agreements Production sharing agreements, Concessions, Service Agreements, Risk agreements Data by country Total energy (consumption per capita · intensity) · Natural gas (consumption · production · reserves · imports · exports) · Petroleum (consumption · production · reserves · imports · exports) Supermajors ExxonMobil · Royal Dutch Shell · BP · Chevron Corporation · ConocoPhillips · Total S.A. (See also: National oil companies) Major oil provinces North Sea · East Texas · Persian Gulf · Athabasca oil sands · Gulf of Mexico · Venezuela · Niger Delta · Russia Related articles OPEC  · History of petroleum  · Peak oil · Oil price increases since 2003 · Price of petroleum · Society of Petroleum Engineers