phosgene

Phosgene[1]
IUPAC name	Dichloromethanal Carbonyl chloride
Other names	CG; carbon dichloride oxide; carbon oxychloride; carbonyl dichloride; chloroformyl chloride; dichloroformaldehyde; dichloromethanone
Identifiers
CAS number	75-44-5 Y
PubChem	6371
EC number	200-870-3
UN number	1076
RTECS number	SY5600000
SMILES	O=C(Cl)Cl
Properties
Molecular formula	CCl2O
Molar mass	98.92 g mol-1
Appearance	colorless gas
Density	4.248 g/dm3 (15 °C) 1.432 g/cm3 (0 °C)
Melting point	−118 °C, 155 K, -180 °F
Boiling point	8.3 °C, 281 K, 47 °F
Solubility in water	hydrolysis
Solubility	soluble in benzene, toluene, acetic acid decomposes in alcohol and acid
Structure
Molecular shape	Planar, trigonal
Dipole moment	1.17 D
Hazards
MSDS	ICSC 0007
EU Index	006-002-00-8
EU classification	Very toxic (T+)
R-phrases	R26 R34
S-phrases	(S1/2) S9 S26 S36/37/39 S45
NFPA 704	0 4 1
Flash point	non-flammable
Related compounds
Related compounds	Thiophosgene Formaldehyde Carbonic acid Urea Carbon monoxide Chloroformic acid
Y (what is this?)  (verify) Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Phosgene is the chemical compound with the formula COCl₂. This colorless gas gained infamy as a chemical weapon during World War I, and is also a valued industrial reagent and building block in organic synthesis. In low concentrations, its odor resembles freshly cut hay or grass. Some soldiers during the First World War stated that it smelled faintly of May Blossom. In addition to its industrial production, small amounts occur naturally from the breakdown of chlorinated compounds and the combustion of chlorine-containing organic compounds.^[2]

Structure and basic properties

Phosgene is a planar molecule as predicted by VSEPR theory. The C=O distance is 1.18 Å, the C---Cl distance is 1.74 Å and the Cl---C---Cl angle is 111.8°.^[3] It is one of the simplest acid chlorides, being formally derived from carbonic acid.

Production

Industrially, phosgene is produced by passing purified carbon monoxide and chlorine gas through a bed of porous activated carbon, which serves as a catalyst. The equation is described as follows:^[2]

CO + Cl₂ → COCl₂ (ΔH_rxn = −107.6kJ/mol)

The reaction is exothermic, therefore the reactor must be cooled. Typically, the reaction is conducted between 50 and 150 °C because above 200 °C, phosgene reverts to carbon monoxide and chlorine, K_eq (300K) = 0.05M. Approximately 5000 tonnes were produced in 1989.

Because of safety issues, phosgene is almost always produced and consumed within the same plant and extraordinary measures are made to contain this toxic gas. It is listed on schedule 3 of the Chemical Weapons Convention: all production sites manufacturing more than 30 tonnes per year must be declared to the OPCW.^[4] Although much less dangerous than most other chemical weapons (e.g. mustard gas), phosgene is still regarded as a viable chemical warfare agent because it is so easy to manufacture when compared to the production requirements of more technically advanced chemical weapons such as the first-generation nerve agent tabun.

Adventitious occurrence

Upon ultraviolet radiation in the presence of oxygen, chloroform slowly converts into phosgene via a radical reaction. To suppress this photodegradation, chloroform is often stored in brown-tinted glass containers. Chlorinated compounds used to remove oils from metals may also react under the UV created during arc welding to produce phosgene.

Uses

The great majority of phosgene is used in the production of isocyanates, the most important being toluene diisocyanate (TDI) and methylene diphenyl diisocyanate (MDI). These isocyanates are precursors to polyurethanes. Significant amounts are also used in the production of polycarbonates via its reaction with bisphenol A.^[2] Polycarbonates are an important class of engineering thermoplastic found, for example, in lenses in eye glasses.

Organic synthesis

Although phosgene still finds use in organic synthesis, a variety of substitutes have been developed, notably trichloromethyl chloroformate (“diphosgene”), which is a liquid at room temperature, and bis(trichloromethyl) carbonate (“triphosgene”), a crystalline substance.^[5] The following are the three most useful reactions involving phosgene.

Synthesis of carbonates

Diols react with phosgene to give either linear or cyclic carbonates (R = H, alkyl, aryl):

HOCR₂-X-CR₂OH + COCl₂ → 1/n [OCR₂-X-CR₂OC(O)-]_n + 2 HCl

Synthesis of isocyanates

The synthesis of isocyanates from amines illustrates the electrophilic character of this reagent and its use in introducing the equivalent of "CO²⁺" (R = alkyl, aryl): ^[6]

RNH₂ + COCl₂ → RN=C=O + 2 HCl

Such reactions are conducted in the presence of a base such as pyridine that absorbs the hydrogen chloride.

Synthesis of acid chlorides

It is also used to produce acid chlorides and carbon dioxide from carboxylic acids:

RCO₂H + COCl₂ → RC(O)Cl + HCl + CO₂

Such acid chlorides react with amines and alcohols to give, respectively, amides and esters, which are commonly used intermediates. Thionyl chloride is more commonly and more safely employed for this application. A specific application for phosgene is the production of chloroformic esters:

ROH + COCl₂ → ROC(O)Cl + HCl

Inorganic chemistry

Although it is somewhat hydrophobic, phosgene reacts with water to release hydrogen chloride and carbon dioxide:

COCl₂ + H₂O → CO₂ + 2 HCl

Analogously, with ammonia, one obtains urea:

COCl₂ + 4 NH₃ → CO(NH₂)₂ + 2 NH₄Cl

Halide exchange with nitrogen trifluoride and aluminium tribromide gives COF₂ and COBr₂, respectively.^[2]

History

Phosgene was synthesized by the chemist John Davy (1790-1868) in 1812 by exposing a mixture of carbon monoxide and chlorine to sunlight. He named it in reference to use of light to promote the reaction; from Greek, phos (light) and gene (born).^[7] It gradually became important in the chemical industry as the 19th century progressed, particularly in dye manufacturing.

Chemical warfare

Following the extensive use of phosgene gas in combat during World War I, it was stockpiled by various countries as part of their secret chemical weapons programs.^[8][9][10]

Safety

Phosgene is an insidious poison as the odor may not be noticed and symptoms may be slow to appear.^[11] Phosgene can be detected at 0.4 ppm, which is 4x the Threshold Limit Value. Its high toxicity arises, not from hydrogen chloride released by hydrolysis, but by the action of the phosgene on the proteins in the pulmonary alveoli. The alveoli are the site of gas exchange, and their damage disrupts the blood-air barrier, causing suffocation. Phosgene detection badges are worn by those at risk of exposure.^[2]

Sodium bicarbonate may be used to neutralise liquid spills of phosgene. Gaseous spills may be mitigated with ammonia.^[12]

References

External links

• Davy's account of his discovery of phosgene
• International Chemical Safety Card 0007
• NIOSH Pocket Guide to Chemical Hazards
• U.S. CDC Emergency Preparedness & Response
• U.S. EPA Acute Exposure Guideline Levels
• Regime For Schedule 3 Chemicals And Facilities Related To Such Chemicals, OPCW website
• CBWInfo website
• Use of Phosgene in WWII and in modern-day warfare (Refer to Section 4.C of the article)
• http://www.vngas.com/pdf/g67.pdf