Depending on the manufacturer, many coil packs mount on a large
transistor plate that actually fires the coil pack. It's not
uncommon for those transistor plate to fail.
Depending on the manufacturer, many coil packs mount on a large
transistor plate that actually fires the coil pack. It's not
uncommon for those transistor plate to fail.
View page
ignition control module
View page
disconnect wires and label them,each coil has its own screws
holding it to plate,take out scews,pull coil straight up do not
bend the coil tangs at mounting of coil. Do this for each coil!
HOPE THIS HELPS!
View page
if it has a coil pack then there is a plate in top of the
engine. it's the one that says quad 4, 2.4l or whichever motor you
have. the should be two or for bolts holding it on. (depending on
engine) the is a plug on one side of the plate. unplug that first
the take out the bolts. just make sure not to crack the plate or
your screwed! you coil pack is under the plate. it's all one
piece.
A transformer has 150 turns on the primary coil and is connected to a 120 volt power source How many turns will be needed on the secondary coil to provide a secondary voltage of 40 volts
A string of 15 Christmas tree lights is connected in series to a 90 volt power source What is the value of the resistance of each light if the current flowing through the circuit is 2 amps
The apparent change in the frequency of a sound emitted by a moving object as it passes a stationary observer is called the what effect