pyrolysis

Share on Facebook Share on Twitter Email
Top
(pī-rŏl'ĭ-sĭs) pronunciation
n.
Decomposition or transformation of a compound caused by heat.

pyrolytic py'ro·lyt'ic (-rə-lĭt'ĭk) adj.
pyrolytically py'ro·lyt'i·cal·ly adv.

A chemical process in which a compound is converted to one or more products by heat. By this definition, reactions that occur by heating in the presence of a catalyst, or in the presence of air when oxidation is usually a simultaneous reaction, are excluded. The terms thermolysis or thermal reaction have been used in essentially the same sense as pyrolysis. A simple example of pyrolysis is the classic experiment in which oxygen was first prepared by heating mercuric oxide [reaction (1)].
1


Similar reactions occur with numerous other metallic oxides and salts. Thermal decomposition or calcining of limestone (calcium carbonate) is the basic step in the manufacture of lime [reaction (2)].
2

The term pyrolysis is most commonly associated with thermal reactions of organic compounds. Pyrolysis of material from plant and animal sources provided some of the first clues about constitution, as in the formation of isoprene from the thermal breakdown of rubber. A range of substances, including benzene, naphthalene, pyridine, and many other aromatic compounds, was obtained from coal tar, a pyrolysis product of coal. All of these pyrolysis processes lead to formation of volatile products characteristic of the source and also residues of char with high carbon content.

Pyrolysis reactions have been used as preparative methods and as means of generating transient intermediates that can be trapped or observed spectroscopically, or quenched by a further reaction. For preparative purposes, pyrolysis can generally be carried out by a flow process in which the reactant is vaporized with a stream of inert gas through a heated tube, sometimes at reduced pressure. In flash vacuum pyrolysis, the apparatus is placed under very low pressure, and the material to be pyrolyzed is vaporized by molecular distillation. See also Chemical dynamics.

Types of reactions

At temperatures of 600–800°C (1100–1500°F), most organic compounds acquire sufficient vibrational energy to cause breaking of bonds with formation of free radicals. Alkanes undergo rupture of carbon-hydrogen (C-H) and carbon-carbon (C-C) bonds to two radicals that then react to give lower alkanes, alkenes, hydrogen, and also higher-molecular-weight compounds resulting from their recombination [reactions (3)].
3a



3b

These reactions are the basis of the thermal cracking processes used in petroleum refining. Pyrolysis of simple aromatic hydrocarbons such as benzene or naphthalene produces aryl radicals, which can attack other hydrocarbon molecules to give bi- and polyaryls, as shown in reaction (4) for the formation of biphenyl.
4

See also Cracking; Free radical.

Pyrolytic eliminations can result in formation of a multiple bond by loss of HX from a compound HCCX, where X = any leaving group. A typical example is the pyrolysis of an ester, which is one of the general methods for preparing alkenes. Pyrolytic elimination is particularly useful when acid-catalyzed dehydration of the parent alcohol leads to cationic rearrangement. Another useful application of this process is the production of ketenes from acid anhydrides [reaction (5)].
5


See also Acid anhydride; Alkene; Ester.

Another type of thermal elimination occurs by loss of a small molecule such as nitrogen (N2), carbon monoxide (CO), carbon dioxide (CO2), or sulfur dioxide (SO2), leading to reactive intermediates such as arynes, diradicals, carbenes, or nitrenes. The nitrene generated from aminobenzotriazole breaks down to benzyne at 0°C (32°F). Benzyne can be trapped by addition reaction or can dimerize to biphenylene. See also Reactive intermediates.

A number of pyrolytic reactions involve cleavage of specific C-C bonds in a carbon chain or ring. Fragmentation accompanied by transfer of hydrogen is a general reaction that occurs by a cyclic process. An example is decarboxylation of acids that contain a carbonyl group, which lose CO2 on relatively mild heating. Acids with a double or triple carbon-to-carbon bond undergo decarboxylation at 300–400°C (570°–750°F). This type of reaction also occurs at higher temperatures with unsaturated alcohols and, by transfer of hydrogen from a CH bond, with unsaturated ethers. Cleavage of a ring frequently occurs on pyrolysis. With alicyclic or heterocyclic four-membered rings, cleavage into two fragments is the reverse of 2 + 2 cycloaddition, as illustrated by the cracking of diketene [reaction (6)].
6


Pyrolysis is an important reaction in the chemistry of the pine terpenes, as in the conversion of β-pinene to myrcene. Benzocyclobutenes undergo ring opening to o-quinone dimethides. By combining this reaction in tandem with formation of the benzocyclobutene and a final Diels-Alder reaction, a versatile one-step synthetic method for the steroid ring system has been developed. See also Diels-Alder reaction; Pine terpene.

Many thermal reactions involve isomerization without elimination or fragmentation. These processes can occur by way of intermediates such as diradicals, as in the pyrolysis of pinene, or they may be concerted pericyclic reactions. An example of the latter is the Claisen-Cope rearrangement of phenyl or vinyl ethers and other 1,5-diene systems. These reactions can be carried out by relatively mild heating, and they are very useful in synthesis. See also Organic synthesis; Pericyclic reaction.

Analytical applications

Thermal breakdown of complex structures leads to very complex mixtures of products arising from concurrent dissociation, elimination, and bond fission. Separation of these mixtures provides a characteristic pyrogram that is valuable as an analytical method, particularly for polymeric materials of both biological and synthetic origin. In this application, a small sample is heated on a hot filament or by laser. The pyrolysis products are then analyzed by gas chromatography, mass spectrometry, or a combination of both techniques. See also Gas chromatography; Mass spectrometry.

Instrumentation with appropriate interfaces and data-handling systems has been developed to permit rapid and sensitive detection of pyrolysis products for a number of applications. One example is the optimization of conditions in petroleum cracking to produce a desired product from varied crude oils. The profile of pyrolysis fragments from a polymer can also be used to detect impurities.



the decomposition or dissociation of a chemical compound by the application of heat. See also thermolysis.
pyrolytic adj.; pyrolyse or (sometimes, US) pyrolyze vb.

Previous:pyrocatechol, pyro+, pyrimidine-nucleoside phosphorylase
Next:pyrophosphatase, pyrophosphate, pyrophosphokinase

Decomposition by heating; said of organic materials.

(pī-rol′i-sis)
n

The breaking down of a substance through the application of heat.

Simplified depiction of pyrolysis chemistry.

Pyrolysis is a thermochemical decomposition of organic material at elevated temperatures without the participation of oxygen. It involves the simultaneous change of chemical composition and physical phase, and is irreversible. The word is coined from the Greek-derived elements pyr "fire" and lysis "separating".

Pyrolysis is a case of thermolysis, and is most commonly used for organic materials, being, therefore, one of the processes involved in charring. The pyrolysis of wood, which starts at 200–300 °C (390–570 °F),[1] occurs for example in fires where solid fuels are burning or when vegetation comes into contact with lava in volcanic eruptions. In general, pyrolysis of organic substances produces gas and liquid products and leaves a solid residue richer in carbon content, char. Extreme pyrolysis, which leaves mostly carbon as the residue, is called carbonization.

The process is used heavily in the chemical industry, for example, to produce charcoal, activated carbon, methanol, and other chemicals from wood, to convert ethylene dichloride into vinyl chloride to make PVC, to produce coke from coal, to convert biomass into syngas and biochar, to turn waste into safely disposable substances, and for transforming medium-weight hydrocarbons from oil into lighter ones like gasoline. These specialized uses of pyrolysis may be called various names, such as dry distillation, destructive distillation, or cracking.

Pyrolysis also plays an important role in several cooking procedures, such as baking, frying, grilling, and caramelizing. In addition, it is a tool of chemical analysis, for example, in mass spectrometry and in carbon-14 dating. Indeed, many important chemical substances, such as phosphorus and sulfuric acid, were first obtained by this process. Pyrolysis has been assumed to take place during catagenesis, the conversion of buried organic matter to fossil fuels. It is also the basis of pyrography. In their embalming process, the ancient Egyptians used a mixture of substances, including methanol, which they obtained from the pyrolysis of wood.

Pyrolysis differs from other high-temperature processes like combustion and hydrolysis in that it does not involve reactions with oxygen, water, or any other reagents. In practice, it is not possible to achieve a completely oxygen-free atmosphere. Because some oxygen is present in any pyrolysis system, a small amount of oxidation occurs.

The term has also been applied to the decomposition of organic material in the presence of superheated water or steam (hydrous pyrolysis), for example, in the steam cracking of oil.

Contents

Occurrence and uses

Fire

Pyrolysis is usually the first chemical reaction that occurs in the burning of many solid organic fuels, like wood, cloth, and paper, and also of some kinds of plastic. In a wood fire, the visible flames are not due to combustion of the wood itself, but rather of the gases released by its pyrolysis, whereas the flame-less burning of a solid, called smouldering, is the combustion of the solid residue (char or charcoal) left behind by pyrolysis. Thus, the pyrolysis of common materials like wood, plastic, and clothing is extremely important for fire safety and firefighting.

Cooking

Pyrolysis occurs whenever food is exposed to high enough temperatures in a dry environment, such as roasting, baking, toasting, grilling, etc.. It is the chemical process responsible for the formation of the golden-brown crust in foods prepared by those methods.

In normal cooking, the main food components that undergo pyrolysis are carbohydrates (including sugars, starch, and fibre) and proteins. (See: Maillard reaction.) Pyrolysis of fats requires a much higher temperature, and, since it produces toxic and flammable products (such as acrolein), it is, in general, avoided in normal cooking. It may occur, however, when grilling fatty meats over hot coals.

Even though cooking is normally carried out in air, the temperatures and environmental conditions are such that there is little or no combustion of the original substances or their decomposition products. In particular, the pyrolysis of proteins and carbohydrates begins at temperatures much lower than the ignition temperature of the solid residue, and the volatile subproducts are too diluted in air to ignite. (In flambé dishes, the flame is due mostly to combustion of the alcohol, while the crust is formed by pyrolysis as in baking.)

Pyrolysis of carbohydrates and proteins requires temperatures substantially higher than 100 °C (212 °F), so pyrolysis does not occur as long as free water is present, e.g., in boiling food — not even in a pressure cooker. When heated in the presence of water, carbohydrates and proteins suffer gradual hydrolysis rather than pyrolysis. Indeed, for most foods, pyrolysis is usually confined to the outer layers of food, and begins only after those layers have dried out.

Food pyrolysis temperatures are, however, lower than the boiling point of lipids, so pyrolysis occurs when frying in vegetable oil or suet, or basting meat in its own fat.

Pyrolysis also plays an essential role in the production of barley tea, coffee, and roasted nuts such as peanuts and almonds. As these consist mostly of dry materials, the process of pyrolysis is not limited to the outermost layers but extends throughout the materials. In all these cases, pyrolysis creates or releases many of the substances that contribute to the flavor, color, and biological properties of the final product. It may also destroy some substances that are toxic, unpleasant in taste, or those that may contribute to spoilage.

Controlled pyrolysis of sugars starting at 170 °C (338 °F) produces caramel, a beige to brown water-soluble product widely used in confectionery and (in the form of caramel coloring) as a coloring agent for soft drinks and other industrialized food products.

Solid residue from the pyrolysis of spilled and splattered food creates the brown-black encrustation often seen on cooking vessels, stove tops, and the interior surfaces of ovens.

Charcoal

Pyrolysis has been used since ancient times for turning wood into charcoal on an industrial scale. Besides wood, the process can also use sawdust and other wood waste products.

Charcoal is obtained by heating wood until its complete pyrolysis (carbonization) occurs, leaving only carbon and inorganic ash. In many parts of the world, charcoal is still produced semi-industrially, by burning a pile of wood that has been mostly covered with mud or bricks. The heat generated by burning part of the wood and the volatile byproducts pyrolyzes the rest of the pile. The limited supply of oxygen prevents the charcoal from burning. A more modern alternative is to heat the wood in an airtight metal vessel, which is much less polluting and allows the volatile products to be condensed.

The original vascular structure of the wood and the pores created by escaping gases combine to produce a light and porous material. By starting with a dense wood-like material, such as nutshells or peach stones, one obtains a form of charcoal with particularly fine pores (and hence a much larger pore surface area), called activated carbon, which is used as an adsorbent for a wide range of chemical substances.

Biochar

Residues of incomplete organic pyrolysis, e.g., from cooking fires, are thought to be the key component of the terra preta soils associated with ancient indigenous communities of the Amazon basin.[2] Terra preta is much sought by local farmers for its superior fertility compared to the natural red soil of the region. Efforts are underway to recreate these soils through biochar, the solid residue of pyrolysis of various materials, mostly organic waste.

Biochar improves the soil texture and ecology, increasing its ability to retain fertilizers and release them slowly. It naturally contains many of the micronutrients needed by plants, such as selenium. It is also safer than other "natural" fertilizers such as manure or sewage, since it has been disinfected at high temperature. And, since it releases its nutrients at a slow rate, it greatly reduces the risk of water table contamination.[3]

Biochar is also being considered for carbon sequestration, with the aim of mitigation of global warming.[4][5][6] When its volatile and gaseous products are combusted or captured, the biochar process emits primarily water vapour.[7] The solid, carbon-containing char produced can be sequestered in the ground, where it will remain indefinitely.[8]

Coke

Pyrolysis is used on a massive scale to turn coal into coke for metallurgy, especially steelmaking. Coke can also be produced from the solid residue left from petroleum refining.

Those starting materials typically contain hydrogen, nitrogen, or oxygen atoms combined with carbon into molecules of medium to high molecular weight. The coke-making or "coking" process consists of heating the material in closed vessels to very high temperatures (up to 2,000 °C or 3,600 °F) so that those molecules are broken down into lighter volatile substances, which leave the vessel, and a porous but hard residue that is mostly carbon and inorganic ash. The amount of volatiles varies with the source material, but is typically 25-30% of it by weight.

Carbon fiber

Carbon fibers are filaments of carbon that can be used to make very strong yarns and textiles. Carbon fiber items are often produced by spinning and weaving the desired item from fibers of a suitable polymer, and then pyrolyzing the material at a high temperature (from 1500–3000 °C or 2730–5430 °F).

The first carbon fibers were made from rayon, but polyacrylonitrile has become the most common starting material.

For their first workable electric lamps, Joseph Wilson Swan and Thomas Edison used carbon filaments made by pyrolysis of cotton yarns and bamboo splinters, respectively.

Pyrolytic carbon

Pyrolysis is the reaction used to coat a preformed substrate with a layer of pyrolytic carbon. This is typically done in a fluidized bed reactor heated to 1000–2000 °C or 1830–3630 °F. Pyrolytic carbon coatings are used in many applications, including artificial heart valves.[9]

Biofuel

Pyrolysis is the basis of several methods that are being developed for producing fuel from biomass, which may include either crops grown for the purpose or biological waste products from other industries.[10]

Although synthetic diesel fuel cannot yet be produced directly by pyrolysis of organic materials, there is a way to produce similar liquid ("bio-oil") that can be used as a fuel, after the removal of valuable bio-chemicals that can be used as food additives or pharmaceuticals.[11] Higher efficiency is achieved by the so-called flash pyrolysis, in which finely divided feedstock is quickly heated to between 350 and 500 °C (660 and 930 °F) for less than 2 seconds.

Fuel bio-oil resembling light crude oil can also be produced by hydrous pyrolysis from many kinds of feedstock, including waste from pig and turkey farming, by a process called thermal depolymerization (which may, however, include other reactions besides pyrolysis).

Plastic waste disposal

Anhydrous pyrolysis can also be used to produce liquid fuel similar to diesel from plastic waste.[11][12]

Processes

In many industrial applications, the process is done under pressure and at operating temperatures above 430 °C (806 °F). For agricultural waste, for example, typical temperatures are 450 to 550 °C (840 to 1,000 °F).


Processes

Since pyrolysis is endothermic,[13] various methods to provide heat to the reacting biomass particles have been proposed:

  • Partial combustion of the biomass products through air injection. This results in poor-quality products.
  • Direct heat transfer with a hot gas, the ideal one being product gas that is reheated and recycled. The problem is to provide enough heat with reasonable gas flow-rates.
  • Indirect heat transfer with exchange surfaces (wall, tubes). It is difficult to achieve good heat transfer on both sides of the heat exchange surface.
  • Direct heat transfer with circulating solids: Solids transfer heat between a burner and a pyrolysis reactor. This is an effective but complex technology.

For flash pyrolysis, the biomass must be ground into fine particles and the insulating char layer that forms at the surface of the reacting particles must be continuously removed. The following technologies have been proposed for biomass pyrolysis:[14]

  • Fixed beds used for the traditional production of charcoal. Poor, slow heat transfer result in very low liquid yields.
  • Augers: This technology is adapted from a Lurgi process for coal gasification. Hot sand and biomass particles are fed at one end of a screw. The screw mixes the sand and biomass and conveys them along. It provides a good control of the biomass residence time. It does not dilute the pyrolysis products with a carrier or fluidizing gas. However, sand must be reheated in a separate vessel, and mechanical reliability is a concern. There is no large-scale commercial implementation.
  • Ablative processes: Biomass particles are moved at high speed against a hot metal surface. Ablation of any char forming at a particle's surface maintains a high rate of heat transfer. This can be achieved by using a metal surface spinning at high speed within a bed of biomass particles, which may present mechanical reliability problems but prevents any dilution of the products. As an alternative, the particles may be suspended in a carrier gas and introduced at high speed through a cyclone whose wall is heated; the products are diluted with the carrier gas.[15] A problem shared with all ablative processes is that scale-up is made difficult, since the ratio of the wall surface to the reactor volume decreases as the reactor size is increased. There is no large-scale commercial implementation.
  • Rotating cone: Pre-heated hot sand and biomass particles are introduced into a rotating cone. Due to the rotation of the cone, the mixture of sand and biomass is transported across the cone surface by centrifugal force. Like other shallow transported-bed reactors relatively fine particles are required to obtain a good liquid yield. There is no large-scale commercial implementation.[16]
  • Fluidized beds: Biomass particles are introduced into a bed of hot sand fluidized by a gas, which is usually a recirculated product gas. High heat transfer rates from fluidized sand result in rapid heating of biomass particles. There is some ablation by attrition with the sand particles, but it is not as effective as in the ablative processes. Heat is usually provided by heat exchanger tubes through which hot combustion gas flows. There is some dilution of the products, which makes it more difficult to condense and then remove the bio-oil mist from the gas exiting the condensers. This process has been scaled up by companies such as Dynamotive and Agri-Therm. The main challenges are in improving the quality and consistency of the bio-oil.
  • Circulating fluidized beds: Biomass particles are introduced into a circulating fluidized bed of hot sand. Gas, sand, and biomass particles move together, with the transport gas usually being a recirculated product gas, although it may also be a combustion gas. High heat transfer rates from sand ensure rapid heating of biomass particles and ablation stronger than with regular fluidized beds. A fast separator separates the product gases and vapors from the sand and char particles. The sand particles are reheated in a fluidized burner vessel and recycled to the reactor. Although this process can be easily scaled up, it is rather complex and the products are much diluted, which greatly complicates the recovery of the liquid products.

Use of vacuum

In vacuum pyrolysis, organic material is heated in a vacuum in order to decrease its boiling point and avoid adverse chemical reactions. It is used in organic chemistry as a synthetic tool. In flash vacuum thermolysis or FVT, the residence time of the substrate at the working temperature is limited as much as possible, again in order to minimize secondary reactions. Thus, a synthesis of 2-Furonitrile has been described employing the dehydration of 2-furoic acid amide or oxime via flash vacuum pyrolysis over molecular sieves in the gas phase.[17]

Industrial sources

Many sources of organic matter can be used as feedstock for pyrolysis. Suitable plant material includes greenwaste, sawdust, waste wood, woody weeds; and agricultural sources including nut shells, straw, cotton trash, rice hulls, switch grass; and animal waste including poultry litter, dairy manure, and potentially other manures. Pyrolysis is used as a form of thermal treatment to reduce waste volumes of domestic refuse. Some industrial byproducts are also suitable feedstock including paper sludge and distillers grain.[18]

There is also the possibility of integrating with other processes such as mechanical biological treatment and anaerobic digestion.[19]

Industrial products

  • syngas (flammable mixture of carbon monoxide and hydrogen): can be produced in sufficient quantities to provide both the energy needed for pyrolysis and some excess production[4][20]
  • solid char that can either be burned for energy or be recycled as a fertilizer (biochar).

Fire protection

Destructive fires in buildings will often burn with limited oxygen supply, resulting in pyrolysis reactions. Thus, pyrolysis reaction mechanisms and the pyrolysis properties of materials are important in fire protection engineering for passive fire protection. Pyrolytic carbon is also important to fire investigators as a tool for discovering origin and cause of fires.

See also

References

  1. ^ Burning of wood, InnoFireWood's website. Accessed on 2010-02-06.
  2. ^ Johannes Lehmann. "Biochar: the new frontier". Archived from the original on 2008-06-18. http://web.archive.org/web/20080618231424/http://www.css.cornell.edu/faculty/lehmann/biochar/Biochar_home.htm. Retrieved 2008-07-10. 
  3. ^ Cundall, Peter (2007-10-27). "Fact Sheet: Pete's Patch". Gardening Australia (Australian Broadcasting Corporation). http://www.abc.net.au/gardening/stories/s2071694.htm. Retrieved 2008-07-10. 
  4. ^ a b Horstman, Mark (2007-09-23). "Agrichar -- A solution to global warming?". ABC TV Science: Catalyst (Australian Broadcasting Corporation). http://www.abc.net.au/catalyst/stories/s2012892.htm. Retrieved 2008-07-10. 
  5. ^ "Trial to reverse global warming". BBC News. 2009-04-09. http://news.bbc.co.uk/1/hi/england/7993034.stm. Retrieved 2009-04-21. 
  6. ^ "The virtues of biochar: A new growth industry?". The Economist. 2009-08-27. http://www.economist.com/sciencetechnology/displaystory.cfm?story_id=14302001. Retrieved 2009-08-30. 
  7. ^ http://biochar.pbworks.com/w/page/9748044/Gases
  8. ^ http://www.biochar-international.org/biochar/faqs#q9
  9. ^ Ratner, Buddy D. (2004). Pyrolytic carbon. In Biomaterials science: an introduction to materials in medicine. Academic Press. p. 171-180. ISBN 0-12-582463-7. Google Book Search. Retrieved 7 July 2011.
  10. ^ Evans, G. "Liquid Transport Biofuels - Technology Status Report", "National Non-Food Crops Centre", 14-04-08. Retrieved on 2009-05-05.
  11. ^ a b "Pyrolysis and Other Thermal Processing". US DOE. Archived from the original on 2007-08-14. http://web.archive.org/web/20070814144750/http://www1.eere.energy.gov/biomass/pyrolysis.html. 
  12. ^ Middleton, Marc (2005-02-06). "Local recycler ignites Euro fuel market". Waste Management & Environment (Waste Management & Environment Media Pty Ltd.). http://www.wme.com.au/categories/waste_managemt/feb6_05.php. Retrieved 2008-07-10. 
  13. ^ He, Fang; Weiming Yi, Xueyuan Bai (September 2006). "Investigation on caloric requirement of biomass pyrolysis using TG–DSC analyzer". Energy Conversion and Management 47 (15-16): 2461–2469. doi:10.1016/j.enconman.2005.11.011. 
  14. ^ Cedric Briens, Franco Berruti and Jan Piskorz, Biomass Valorization for Fuel and Chemicals Production – A Review, IJCRE, vol. 6, R2, Available at: http://www.bepress.com/ijcre/vol6/R2/
  15. ^ PowerPoint-presentatie
  16. ^ "BTG Biomass Technology Group b.v. :: Technology:: Pyrolysis". Archived from the original on 2007-07-03. http://web.archive.org/web/20070703000320/http://www.btgworld.com/technologies/pyrolysis.html. 
  17. ^ Jacqueline A. Campbell; McDougald, Graham; McNab, Hamish (2007). "Laboratory-scale synthesis of nitriles by catalyzed dehydration of amides and oximes under flash vacuum pyrolysis (FVP) conditions". Synthesis 20: 3179–3184. 
  18. ^ "Biomass Feedstock for Slow Pyrolysis". BEST Pyrolysis, Inc. website. BEST Energies, Inc.. http://www.bestenergies.com/companies/bestpyrolysis.html. Retrieved 2010-07-30. 
  19. ^ Marshall, A. T. & Morris, J. M. (2006) A Watery Solution and Sustainable Energy Parks, CIWM Journal, August p22-23
  20. ^ "Designer Fuels: The Next Fuel Generation" (PDF). Archived from the original on 2006-12-18. http://web.archive.org/web/20061218035002/http://www.geagroup.com/imperia/md/content/presse/2005.11.30_presentation_dr_plass_e.pdf. 

External links

The Wiktionary entry for pyrolysis


Post a question - any question - to the WikiAnswers community:

Copyrights:

Mentioned in

pyrolysate (chemistry)
reformed gas (materials)
Blanc rule (organic chemistry)