screen-print

 

multiple printing technique, also known as serigraphy, involving the use of stencils to transfer the design. Paint is applied to a silk or nylon screen and penetrates areas of the screen not blocked by the stencil. By using several stencils a number of colors may be employed in a single print. Silk-screen printing was developed as a commercial medium; it is used by modern artists, including Andy Warhol, who have combined it with photographic processes.

This article is part of the series on: History of printing

Technologies

Phaistos Disc (1850–1400 BCE)

Woodblock printing (200 CE)

Movable type (1040)

Printing press (1439)

Rotary press (1843)

Intaglio (printmaking)

Lithography (1796)

Chromolithography (1837)

Offset press

Screen-printing (1907)

Flexography

Thermal printer

Photocopier (1960s)

Laser printer (1969)

Dot matrix printer (1970)

Inkjet printer

Dye-sublimation printer

Digital press (1993)

3D printing

Screenprinting, silkscreening, or serigraphy is a printmaking technique that creates a sharp-edged image using a stencil. A screenprint or serigraph is an image created using this technique.

It began as an industrial technology, and was adopted by American graphic artists in the early 1900s. It is currently popular both in fine arts and in commercial printing, where it is commonly used to print images on T-shirts, hats, CDs, DVDs, ceramics, glass, polyethylene, polypropylene, paper, metals, and wood. The Printer's National Environmental Assistance Center says "Screen printing is arguably the most versatile of all printing processes."^[1] Since rudimentary screen-printing materials are so affordable and readily available, it has been used frequently in underground settings and subcultures, and the non-professional look of such DIY culture screen prints has become a significant cultural aesthetic seen on movie posters, record album covers, flyers, shirts, commercial fonts in advertising, and elsewhere.

Graphic screenprinting is widely used today to create many mass or large batch produced graphics, such as posters or display stands. Full color prints can be created by printing in CMYK (cyan, magenta, yellow and black). Screenprinting is often preferred over other processes such as dye sublimation or inkjet printing because of its low cost and ability to print on many types of media.

History

Screenprinting has its origins in simple stencilling, most notably of the Japanese form (katazome), used who cut banana leaves and inserted ink through the design holes on textiles, mostly for clothing. This was taken up in France. The modern screenprinting process originated from patents taken out by Samuel Simon in 1907 in England. This idea was then adopted in San Francisco, California, by John Pilsworth in 1914 who used screenprinting to form multicolor prints in a subtractive mode, differing from screenprinting as it is done today.

Screenprinting took off during the First World War as an industrial process for printing flags and banners. The use of photographic stencils at this time made the process more versatile and encouraged widespread use.

Printing technique

A screen is made of a piece of porous, finely woven fabric (originally silk, but typically made of polyester since the 1940s) stretched over a frame of aluminum or wood. Areas of the screen are blocked off with a non-permeable material to form a stencil, which is a positive of the image to be printed; that is, the open spaces are where the ink will appear.

The screen is placed atop a substrate such as paper or fabric. Ink is placed on top of the screen, and a fill bar (also known as a floodbar) is used to fill the mesh openings with ink. The operator begins with the fill bar at the rear of the screen and behind a reservoir of ink. The operator lifts the screen to prevent contact with the substrate and then using a slight amount of downward force pulls the fill bar to the front of the screen . This effectively fills the mesh openings with ink and moves the ink reservoir to the front of the screen. the operator then uses a squeegee (rubber blade) to move the mesh down to the substrate and pushes the squeegee to the rear of the screen. The ink that is in the mesh opening is transferred by capillary action to the substrate in a controlled and prescribed amount, i.e. the wet ink deposit is equal to the thickness of the stencil. As the squeegee moves toward the rear of the screen the tension of the mesh pulls the mesh up away from the substrate leaving the ink upon the substrate surface.

There are three types of screen printing presses. The 'flat-bed' (probably the most widely used), 'cylinder', and 'rotary'.^[2]

Textile items are printed in multi-color designs using a wet on wet technique, while graphic items are allowed to dry between colors that are then printed with another screen and often in a different color.

The screen can be re-used after cleaning. However if the design is no longer needed, then the screen can be "reclaimed", that is cleared of all emulsion and used again. The reclaiming process involves removing the ink from the screen then spraying on stencil remover to remove all emulsion. Stencil removers come in the form of liquids, gels, or powders. The powdered types have to be mixed with water before use, and so can be considered to belong to the liquid category. After applying the stencil remover the emulsion must be washed out using a pressure washer.

Most screens are ready for recoating at this stage, but sometimes screens will have to undergo a further step in the reclaiming process called dehazing. This additional step removes haze or ghost images left behind in the screen once the stencil has been removed. These hangers-on tend to faintly outline the open areas of previous stencils, hence the name ghosts. They are the result of ink residue trapped in the mesh, often in the knuckles of the mesh, those points where threads overlap. ^[3]

While the public thinks of garments in conjunction with screen printing, the technique is used on tens of thousands of items, decals, clock and watch faces, and many more products.

Stenciling techniques

There are several ways to create a stencil for screenprinting. An early method was to create it by hand in the desired shape, either by cutting the design from a non-porous material and attaching it to the bottom of the screen, or by painting a negative image directly on the screen with a filler material which became impermeable when it dried. For a more painterly technique, the artist would choose to paint the image with drawing fluid, wait for the image to dry, and then coat the entire screen with screen filler. After the filler had dried, water was used to spray out the screen, and only the areas that were painted by the drawing fluid would wash away, leaving a stencil around it. This process enabled the artist to incorporate their hand into the process, to stay true to their drawing.

A method that has increased in popularity over the past 70 years is the photo emulsion technique:

1. The original image is created on a transparent overlay. The image may be drawn or painted directly on the overlay, photocopied, or printed with a laser printer, as long as the areas to be inked are opaque. A black-and-white negative may also be used (projected on to the screen). However, unlike traditional platemaking, these screens are normally exposed by using film positives.
2. The overlay is placed over the emulsion-coated screen, and then exposed with a ultraviolet light source in the 350-420 Nanometer spectrum. Other light sources do not work well. The UV light passes through the clear areas and create a polymerization (hardening) of the emulsion.
3. The screen is washed off thoroughly. The areas of emulsion that were not exposed to light dissolve and wash away, leaving a negative stencil of the image on the mesh.

Photographic screens can reproduce images with a high level of detail, and can be reused for tens of thousands of copies. The ease of producing transparent overlays from any black-and-white image makes this the most convenient method for artists who are not familiar with other printmaking techniques. Artists can obtain screens, frames, emulsion, and lights separately; there are also preassembled kits, which are especially popular for printing small items such as greeting cards.

Another great thing about screen printing is that large quantities can be produced rapidly with new automatic presses. (about 800 shirts in 1 hour)

Versatility

Screenprinting is more versatile than traditional printing techniques. The surface does not have to be printed under pressure, unlike etching or lithography, and it does not have to be planar. Screenprinting inks can be used to work with a variety of materials, such as textiles, ceramics, wood, paper, glass, metal, and plastic. As a result, screen printing is used in many different industries, from clothing to product labels to circuit board printing.

See also

• Gocco
• Photo emulsion

External Links

http://www.pneac.org/printprocesses/screen/

Notes

Donate to Wikimedia