In economics a social welfare function can be defined as a real-valued
function that ranks conceivable social states (alternative complete
descriptions of the society) from lowest on up as to welfare of the society. Inputs of the function include any variables considered to affect welfare of the
society (Sen, 1970, p. 33). In using welfare measures of persons in the society as inputs, the social welfare function is
individualistic in form. One use of a social welfare function is to
represent prospective patterns of collective choice as to alternative social
states. The social welfare function is analogous to an indifference-curve map for an
individual, except that the social welfare function is a mapping of individual preferences or judgments of everyone in the
society as to collective choices, which apply to all, whatever individual preferences are. One point of a social welfare function
is to determine how close the analogy is to an ordinal utility function for an individual with
at least minimal restrictions suggested by welfare economics. Kenneth Arrow proved a more basic point for a set
of seemingly reasonable conditions.
Bergson-Samuelson social welfare function
In a 1938 article Abram Bergson introduced the social welfare function. The
object was "to state in precise form the value judgments required for the derivation of the conditions of maximum economic
welfare" set out by earlier writers, including Marshall and Pigou, Pareto and Barone, and Lerner. The function was real-valued and
differentiable. It was specified to describe the society as a whole. Arguments of the
function included the quantities of different commodities produced and consumed and of resources used in producing different commodities, including labor.
Necessary general conditions are that at the maximum value of the function:
- The marginal "dollar's worth" of welfare is equal for each individual and for each commodity
- The marginal "diswelfare" of each "dollar's worth" of labor is equal for each commodity produced of each labor supplier
- The marginal "dollar" cost of each unit of resources is equal to the marginal value productivity for each commodity.
Bergson showed how welfare economics could describe a standard of economic
efficiency despite dispensing with interpersonally-comparable cardinal utility,
the hypothesizaton of which may merely conceal value judgments, and purely subjective ones at that.
Earlier neoclassical welfare theory, heir to the classical utilitarianism of Bentham, had not infrequently treated the
Law of Diminishing Marginal Utility as implying interpersonally comparable utility, a
necessary condition to achieve the goal of maximizing total utility of the society. Irrespective of such comparability, income or
wealth is measurable, and it was commonly inferred that redistributing income from a rich person to a poor person tends to
increase total utility (however measured) in the society.* But Lionel Robbins (1935, ch. VI) argued that how or how much utilities, as
mental events, would have changed relative to each other is not measurable by any empirical test. Nor are they inferable from the
shapes of standard indifference curves. Hence, the advantage of being able to dispense with interpersonal comparablity of utility
without abstaining from welfare theory.
- A practical qualification to this was any reduction in output from the transfer.
|
Auxiliary specifications enable comparison of different social states by each member of society in preference satisfaction.
These help define Pareto efficiency, which holds if all alternatives have been
exhausted to put at least one person in a more preferred position with no one put in a less preferred position. Bergson described
an "economic welfare increase" (later called a Pareto improvement) as at least one individual moving to a more preferred
position with everyone else indifferent. The social welfare function could then be specified in a substantively
individualistic sense to derive Pareto efficiency (optimality). Paul Samuelson (2004, p.
26) notes that Bergson's function "could derive Pareto optimality conditions as necessary but not sufficient for defining
interpersonal normative equity." Still, Pareto efficiency could also characterize one dimension of a particular social
welfare function with distribution of commodities among individuals characterizing another dimension. As Bergson noted, a
welfare improvement from the social welfare function could come from the "position of some individuals" improving at the expense
of others. That social welfare function could then be described as characterizing an equity dimension.
Samuelson (1947, p. 221) himself stressed the flexibility of the
social welfare function to characterize any one ethical belief, Pareto-bound or not, consistent with:
- a complete and transitive ranking (an ethically "better", "worse", or "indifferent" ranking) of all social alternatives
and
- one set out of an infinity of welfare indices and cardinal indicators to characterize the belief.
He also presented a lucid verbal and mathematical exposition of the social welfare function (1947, pp. 219-49) with minimal
use of Lagrangean multipliers and without the difficult notation of differentials used by Bergson throughout. As Samuelson (1983,
p. xxii) notes, Bergson clarified how production and consumption efficiency conditions are distinct from the interpersonal
ethical values of the social welfare function.
Samuelson further sharpened that distinction by specifying the Welfare function and the Possibility function
(1947, pp. 243-49). Each has as arguments the set of utility functions for
everyone in the society. Each can (and commonly does) incorporate Pareto efficiency. The Possibility function also depends on
technology and resource restraints. It is written in implicit form, reflecting the feasible locus of utility combinations
imposed by the restraints and allowed by Pareto efficiency. At a given point on the Possibility function, if the utility of all
but one person is determined, the remaining person's utility is determined. The Welfare function ranks different hypothetical
sets of utility for everyone in the society from ethically lowest on up (with ties permitted), that is, it makes
interpersonal comparisons of utility. Welfare maximization then consists of maximizing the Welfare function subject to the
Possibility function as a constraint. The same welfare maximization conditions emerge as in Bergson's analysis.
For a two-person society, there is a graphical depiction of such welfare maximization at the first figure of Bergson-Samuelson
social welfare functions. Relative to consumer theory for an individual as to
two commodities consumed, there are the following parallels:
- The respective hypothetical utilities of the two persons in two-dimensional utility space is analogous to respective
quantities of commodities for the two-dimensional commodity space of the indifference-curve surface
- The Welfare function is analogous to the indifference-curve map
- The Possibility function is analogous to the budget constraint
- Two-person welfare maximization at the tangency of the highest Welfare function curve on the Possibility function is
analogous to tangency of the highest indifference curve on the budget constraint.
|
Arrow social welfare function (constitution)
Kenneth Arrow (1963)
generalizes the analysis. Along earlier lines, his version of a social welfare function, also called a 'constitution', maps a set
of individual orderings (ordinal utility functions) for everyone in the society to a
social ordering, a rule for ranking alternative social states (say passing an enforceable law or not, ceteris paribus). Arrow finds that nothing of behavioral significance is lost by dropping the
requirement of social orderings that are real-valued (and thus cardinal) in favor of orderings, which are merely
complete and transitive, such as a standard indifference-curve map. The
earlier analysis mapped any set of individual orderings to one social ordering, whatever it was. This social ordering
selected the top-ranked feasible alternative from the economic environment as to resource constraints. Arrow proposed to examine mapping different sets of individual
orderings to possibly different social orderings. Here the social ordering would depend on the set of individual orderings,
rather than being imposed (invariant to them). Stunningly (relative to a course of theory from Adam Smith and Jeremy Bentham on), Arrow proved the
General Possibility Theorem that it is impossible to have a social
welfare function that satisfies a certain set of "apparently reasonable" conditions.
Cardinal social welfare functions again
In the above contexts, a social welfare function provides a kind of social preference based on only individual
utility functions, whereas in others it includes cardinal measures of social welfare not
aggregated from individual utility functions. Examples of such measures are life
expectancy and per capita income for the society. The rest of this article adopts the latter definition. Motivation for
such a measure is in its appeal, whether to officials, advisors, or voters.
The form of the social welfare function is intended to express a statement of objectives of a society. For example, take this
example of a social welfare function:

where W is social welfare and Yi is
the income of individual i among n in the society. In this case, maximising the social welfare function means
maximising the total income of the people in the society, without regard to how incomes are distributed in society.
Alternatively, consider the Max-Min utility function (based on the philosophical work of John
Rawls):

Here, the social welfare of society is taken to be related to the income of the poorest person in the society, and maximising
welfare would mean maximising the income of the poorest person without regard for the incomes of the others.
These two social welfare functions express very different views about how a society would need to be organised in order to
maximise welfare, with the first emphasizing total incomes and the second emphasising the needs of the poorest. The max-min
welfare function can be seen as reflecting an extreme form of risk aversion on the part of
society as a whole, since it is concerned only with the worst conditions that a member of society could face.
Amartya Sen proposed a welfare function in 1973:
W = Income×(1 -
Inequality)
Income is the average per capita income of a measured
group (e.g. nation). Inequality is the relative inequality of
the income distribution within that group. Here Sen used the Gini Index. James E.
Foster (1996) proposed to use one of Atkinson's Indexes, which is an entropy
measure. Foster's welfare function also can be computed directly using the Theil Index.
See also
References
- Kenneth J. Arrow, 1951, 2nd ed., 1963, Social Choice and Individual Values ISBN 0-300-01364-7
- Abram Bergson (Burk),"A Reformulation of Certain Aspects of Welfare Economics,"
Quarterly Jounal of Economics, 52(2), February 1938, 310-34
- James E. Foster and Amartya Sen, 1996, On Economic Inequality, expanded edition
with annexe, ISBN 0-19-828193-5).
- John C. Harsanyi, 1987, “interpersonal utility comparisons," The New Palgrave: A Dictionary of Economics, v. 2, 955-58
- Lionel Robbins, 1935, 2nd ed.. An Essay on the Nature and Significance of Economic
Science, ch. VI
- ____, 1938, "Interpersonal Comparisons of Utility: A Comment," Economic Journal, 43(4), 635-41
- Paul A. Samuelson, 1947, Enlarged ed. 1983, Foundations of Economic Analysis, pp. xxi-xxiv & ch. VIII, "Welfare Economics,"
ISBN 0-674-31301-1
- ____, 2004, "Abram
Bergson 1914-2003: A Biographical Memoir"
- Amartya K. Sen, 1970 [1984], Collective Choice and Social Welfare, ch. 3,
"Collective Rationality" ISBN 0-444-85127-5
- Kotaro Suzumura, 1987, “social welfare function," The New Palgrave: A Dictionary of Economics, v. 4, 418-20
- Bergson-Samuelson social welfare functions in Paretian welfare economics from the New School
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)