Precision engineers level
An engineers spirit level is generally used to level machines, although they may
be used to level large workpieces on machines such as planers. Spirit levels are
also used in building construction, by carpenters and
masons.
The upper image is a plain precision level used in the engineering field to level machines or workpieces, the lower
image shows an adjustable precision level that has an accuracy of 1:10000. The adjustable nature of this level can also be used
to measure the inclination of an object.
The accuracy of a spirit level can be checked by placing it on any flat surface, marking the bubble's position and rotating
the level 180°. The position of the bubble should then be symmetrical to the first reading.
Both levels have a "vee" groove machined along the base which enables the level to sit on a round bar while remaining parallel
with the bar's axis. They also have a smaller cross level to enable the second axis to be roughly checked or corrected.
While a precision level may be used to check and correct the twist in a machine (or workpiece), its presence does not
necessarily need to be corrected.
- A machine such as a mill or lathe does not
have to be perfectly level to operate correctly but may in fact have a known twist introduced to the machines bed. This twist is
often introduced to ensure that a worn lathe turns parallel work, by realigning the bed (that is worn) to the spindle axis
(unworn).
- Levelling a ships lathe would be pointless due to the nature of the ships base - floating on water. Correcting any twist in
the bed however would be essential for accurate work to be reproduced from the lathe.
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
