thermistor: Definition from Answers.com

This article needs additional citations for verification.
Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (May 2009)

NTC thermistor, bead type, insulated wires

A thermistor is a type of resistor whose resistance varies with temperature. The word is a portmanteau of thermal and resistor. Thermistors are widely used as inrush current limiters, temperature sensors, self-resetting overcurrent protectors, and self-regulating heating elements.

Thermistors differ from resistance temperature detectors (RTD) in that the material used in a thermistor is generally a ceramic or polymer, while RTDs use pure metals. The temperature response is also different; RTDs are useful over larger temperature ranges, while thermistors typically achieve a higher precision within a limited temperature range [usually -90C to 130C].

1 Basic operation
2 Steinhart-Hart equation
3 B parameter equation
4 Conduction model
5 Self-heating effects
6 Applications
7 History
8 References
9 See also
10 External links

Basic operation

Thermistor symbol

Assuming, as a first-order approximate that the relationship between resistance and temperature is linear, then:

Δ R = k Δ T

where

Δ R

= change in resistance

Δ T

= change in temperature

k

= first-order temperature coefficient of resistance

Thermistors can be classified into two types depending on the sign of $k$ . If $k$ is positive, the resistance increases with increasing temperature, and the device is called a positive temperature coefficient (PTC) thermistor, or posistor. If $k$ is negative, the resistance decreases with increasing temperature, and the device is called a negative temperature coefficient (NTC) thermistor. Resistors that are not thermistors are designed to have a $k$ as close to zero as possible, so that their resistance remains nearly constant over a wide temperature range.

Instead of the temperature coefficient k, sometimes the temperature coefficient of resistance $α$ (alpha) or $α T$ is used. It is defined as^[1]

$\alpha_T = \frac{1}{R(T)} \frac{dR}{dT}.$

For example, for the common PT100 sensor, $α = 0.00385$ or 0.385 %/°C. This $α T$ coefficient should not be confused with the $α$ parameter below.

Steinhart-Hart equation

In practice, the linear approximation (above) works only over a small temperature range. For accurate temperature measurements, the resistance/temperature curve of the device must be described in more detail. The Steinhart-Hart equation is a widely used third-order approximation:

$\frac{1}{T}=a+b\,\ln(R)+c\,\ln^3(R)$

where a, b and c are called the Steinhart-Hart parameters, and must be specified for each device. T is the temperature in kelvins and R is the resistance in ohms. To give resistance as a function of temperature, the above can be rearranged into:

$R=e^{{\left( \beta-{\alpha \over 2} \right)}^{1\over 3}-{\left( \beta+{\alpha \over 2} \right)}^{1\over 3}}$

where

$\alpha={{a-{1\over T}}\over c}$ and $\beta=\sqrt{{{{\left({b\over{3c}}\right)}^3}+{{\alpha^2}\over 4}}}$

The error in the Steinhart-Hart equation is generally less than 0.02°C in the measurement of temperature. As an example, typical values for a thermistor with a resistance of 3000 Ω at room temperature (25°C = 298.15 K) are:

$a = 1.40 \times 10^{-3}$

$b = 2.37 \times 10^{-4}$

$c = 9.90 \times 10^{-8}$

B parameter equation

NTC thermistors can also be characterised with the B parameter equation, which is essentially the Steinhart Hart equation with c=0, and B = 1/b.

$\frac{1}{T}=\frac{1}{T_0} + \frac{1}{B}\ln \left(\frac{R}{R_0}\right)$

where the temperatures are in kelvin and R₀ is the resistance at temperature T₀ (usually 25 °C=298.15 K). Solving for R yields:

$R=R_0e^{B(1/T-1/T_0)}$

or, alternatively,

$R=r_\infty e^{B/T}$

where $r_\infty=R_0 e^{-{B/T_0}}$ . This can be solved for the temperature:

$T={B\over { {\ln{(R / r_\infty)}}}}$

The B-parameter equation can also be written as $\ln R=B/T + \ln r_\infty$ . This can be used to convert the function of resistance vs. temperature of a thermistor into a linear function of $ln R$ vs. $1 / T$ . The average slope of this function will then yield an estimate of the value of the B parameter.

Conduction model

Many NTC thermistors are made from a pressed disc or cast chip of a semiconductor such as a sintered metal oxide. They work because raising the temperature of a semiconductor increases the number of electrons able to move about and carry charge - it promotes them into the conduction band. The more charge carriers that are available, the more current a material can conduct. This is described in the formula:

$I = n \cdot A \cdot v \cdot e$

$I$ = electric current (ampere)
$n$ = density of charge carriers (count/m³)
$A$ = cross-sectional area of the material (m²)
$v$ = velocity of charge carriers (m/s)
$e$ = charge of an electron ( $e=1.602 \times 10^{-19}$ coulomb)

The current is measured using an ammeter. Over large changes in temperature, calibration is necessary. Over small changes in temperature, if the right semiconductor is used, the resistance of the material is linearly proportional to the temperature. There are many different semiconducting thermistors with a range from about 0.01 kelvin to 2,000 kelvins (-273.14°C to 1,700°C).

Most PTC thermistors are of the "switching" type, which means that their resistance rises suddenly at a certain critical temperature. The devices are made of a doped polycrystalline ceramic containing barium titanate (BaTiO₃) and other compounds. The dielectric constant of this ferroelectric material varies with temperature. Below the Curie point temperature, the high dielectric constant prevents the formation of potential barriers between the crystal grains, leading to a low resistance. In this region the device has a small negative temperature coefficient. At the Curie point temperature, the dielectric constant drops sufficiently to allow the formation of potential barriers at the grain boundaries, and the resistance increases sharply. At even higher temperatures, the material reverts to NTC behaviour. The equations used for modeling this behaviour were derived by W. Heywang and G. H. Jonker in the 1960s.

Another type of PTC thermistor is the polymer PTC, which is sold under brand names such as "Polyswitch" "Semifuse", and "Multifuse". This consists of a slice of plastic with carbon grains embedded in it. When the plastic is cool, the carbon grains are all in contact with each other, forming a conductive path through the device. When the plastic heats up, it expands, forcing the carbon grains apart, and causing the resistance of the device to rise rapidly. Like the BaTiO₃ thermistor, this device has a highly nonlinear resistance/temperature response and is used for switching, not for proportional temperature measurement.

Yet another type of thermistor is a Silistor, a thermally sensitive silicon resistor. Silistors are similarly constructed and operate on the same principles as other thermistors, but employ silicon as the semiconductive component material.

Self-heating effects

When a current flows through a thermistor, it will generate heat which will raise the temperature of the thermistor above that of its environment. If the thermistor is being used to measure the temperature of the environment, this electrical heating may introduce a significant error if a correction is not made. Alternatively, this effect itself can be exploited. It can, for example, make a sensitive air-flow device employed in a sailplane rate-of-climb instrument, the electronic variometer, or serve as a timer for a relay as was formerly done in telephone exchanges.

The electrical power input to the thermistor is just:

$P_E=IV\,$

where I is current and V is the voltage drop across the thermistor. This power is converted to heat, and this heat energy is transferred to the surrounding environment. The rate of transfer is well described by Newton's law of cooling:

$P_T=K(T(R)-T_0)\,$

where T(R) is the temperature of the thermistor as a function of its resistance R, $T 0$ is the temperature of the surroundings, and K is the dissipation constant, usually expressed in units of milliwatts per °C. At equilibrium, the two rates must be equal.

$P_E=P_T\,$

The current and voltage across the thermistor will depend on the particular circuit configuration. As a simple example, if the voltage across the thermistor is held fixed, then by Ohm's Law we have $I = V / R$ and the equilibrium equation can be solved for the ambient temperature as a function of the measured resistance of the thermistor:

$T_0=T(R) -\frac{V^2}{KR}\,$

The dissipation constant is a measure of the thermal connection of the thermistor to its surroundings. It is generally given for the thermistor in still air, and in well-stirred oil. Typical values for a small glass bead thermistor are 1.5 mW/°C in still air and 6.0 mW/°C in stirred oil. If the temperature of the environment is known beforehand, then a thermistor may be used to measure the value of the dissipation constant. For example, the thermistor may be used as a flow rate sensor, since the dissipation constant increases with the rate of flow of a fluid past the thermistor.

Applications

NTC thermistors are used as resistance thermometers in low-temperature measurements of the order of 10 K.
NTC thermistors can be used as inrush-current limiting devices in power supply circuits. They present a higher resistance initially which prevents large currents from flowing at turn-on, and then heat up and become much lower resistance to allow higher current flow during normal operation. These thermistors are usually much larger than measuring type thermistors, and are purposely designed for this application.
NTC thermistors are regularly used in automotive applications. For example, they monitor things like coolant temperature and/or oil temperature inside the engine and provide data to the ECU and, indirectly, to the dashboard.
Thermistors are also commonly used in modern digital thermostats and to monitor the temperature of battery packs while charging.

History

The first NTC thermistor was discovered in 1833 by Michael Faraday, who reported on the semiconducting behavior of silver sulfide. Faraday noticed that the resistance of silver sulfide decreased dramatically as temperature increased. Because early thermistors were difficult to produce and applications for the technology were limited, commercial production of thermistors did not begin until the 1930s.^[2]

References

^ Thermistor Terminology. U.S. Sensor
^ McGee, Thomas (1988). "9". Principles and Methods of Temperature Measurement.

External links

Wikimedia Commons has media related to: Thermistors

This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)

Donate to Wikimedia

		Dictionary. The American Heritage® Dictionary of the English Language, Fourth Edition Copyright © 2007, 2000 by Houghton Mifflin Company. Updated in 2009. Published by Houghton Mifflin Company. All rights reserved. Read more
		Sci-Tech Encyclopedia. McGraw-Hill Encyclopedia of Science and Technology. Copyright © 2005 by The McGraw-Hill Companies, Inc. All rights reserved. Read more
		Dental Dictionary. Mosby's Dental Dictionary. Copyright © 2004 by Elsevier, Inc. All rights reserved. Read more
		Veterinary Dictionary. Saunders Comprehensive Veterinary Dictionary 3rd Edition. Copyright © 2007 by D.C. Blood, V.P. Studdert and C.C. Gay, Elsevier. All rights reserved. Read more
		Electronics Dictionary. Copyright 2001 by Twysted Pair. All rights reserved. Read more
		Wikipedia. This article is licensed under the Creative Commons Attribution/Share-Alike License. It uses material from the Wikipedia article "Thermistor". Read more

	infrared thermistor (electronics)
	electronic thermometer (engineering)
	posistor (electronics)

	Why are thermistors used? Read answer...
	How does a thermistor work? Read answer...
	What does a 'thermistor' measure? Read answer...

	What is the symbol of thermistor?
	Can you link a thermistor out?
	How do you test a thermistor?

thermistor

Contents