0
What else can I help you with?
1990 Jeep Cherokee i know my headlights and brights are in the same bulb and my headlights come on but brights dont so i replaced the wiring inside the steering column and they still dont work ideas?
have you replaced the dimmer switch? if not that may be the problem. I had the same problem in reverse( brights worked but headlights didn't) water damaged the dimmer switch on the steering column once I replaced it all was good.
What if Your 2002 Chevy trailblazer is shaking sometimes and when shaking has a funny smell Any ideas?
Google for 'misfire'.
1997 Chevy sluggish under heavy acceleration any ideas runs perfect except that?
try the fuel filter.
1997 Chevy s10 blazer no reverse any ideas?
i have a 92 s-10 blazer and it has no reverse Andy ideas?. it will go in to drive and shift in to all the gears..but will no go into reverse? can u help me
96 Chevy s10 turns over but will not start Any ideas why?
Start looking at fire and gas. Trace these two that are the main problems.
1990 Chevy k1500 front differential not working and its not the actuator or the transfer case any ideas?
Need one hell of a lot more information then this
If you have no dash lights on a 1989 Chevy S10 checked fuse and it is fine any ideas?
The dash illumination dimmer switch is shut off or broken.
Why would a 95 Chevy lumina stop working?
I had the alternator looked at i had the startr looked at I think it is a security thing but cannot place the problem ne ideas......
I have a 1993 Chevy Cheyenne 2500 and the dash lights do not work Fuses and bulbs are good Any ideas?
It could be the dimmer switch that will adjust the dash lights
What is wrong with my 1996 Chevy Astro no dash lights no tail lights I tried the headlight switch Any ideas?
Dash lights and tail lights are on the same fuse.
You are tring to flush the radiator on a 98 Chevy Tahoe you can see the drain plug but no way to access it Any ideas?
get under the truck and look up. should be accesable from there.
You Have a 1993 Chevy Cavalier 2.2 Engine and the Number 1 and 4 cylinders are not firing you replaced the coil but their still not firing any ideas?
your control module is bad
