The speaker wires have 2 pin connectors that connect to the coaxial speakers in the doors.. If looking to upgrade speakers make sure you do research on the physical size of the new speaker as there might be issues. Also you can pick up a wire harness to connect the factory wire harness that is mounted to the door to a new set of speakers.
Remove the door panel and then you get access to the speaker
take door panel off should be screwed to door remove screws take speaker out unhook wires
Take the door apart, unscrew the speaker and there are the wires. They run from there to the back of your stereo system. If you pull out your deck you can see the other ends there
Remove the door speaker cover. The cover is held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker. Reverse the process to install the new speaker.
The left speaker wire (+) is dark green, and the left speaker wire (-) is brown/red in the door of a 1997 Dodge Ram. For the right speaker, the right speaker wire (+) is purple, and the right speaker wire (-) is dark blue/red.
take off the door panels and unscrew the speaker from the door and unhook the wires and in reverse order install the new speaker(s).......
To replace the door speakers on a 2002 Honda Accord EX, first, remove the door panel by unscrewing the screws and gently prying off the panel clips. Disconnect the speaker wires and remove the old speaker by unscrewing it from the door. Install the new speaker by securing it with screws, reconnecting the wires, and then reattach the door panel, ensuring everything is aligned and secured properly. Finally, test the new speakers to ensure they are functioning correctly.
what about them? yeah for real, my door locks work pretty well.
To replace the front door speakers in a 1993 Cadillac Fleetwood, start by removing the door panel. Use a screwdriver to remove screws securing the panel and gently pry it off, being careful not to damage any clips. Once the panel is off, disconnect the speaker wires and unscrew the old speaker from its mounting. Install the new speaker by reversing the process: secure it in place, reconnect the wires, and reattach the door panel.
For the front door speakers in a 1997 Honda Civic, the left front speaker wire (+) is blue and the left front speaker wire (-) is gray/black. For the right side, the front speaker wire (+) is red/green, and the right front speaker wire (-) is brown/black.
What I have done before is i attached wires from my door speaker and connected my sub. It sounded pretty good.
First remove the speaker grillNext remove all of the Phillips head screws from the speaker area,door pull,inside door handle and also door panel.The door panel should now be easy to remove.Disconnect any latching rods and wires from the backside of the door panel.