Shorted out spark plug wire. Boot that goes down into the top of the engine onto the spark plug sometimes gets brittle and cracks causing arcing to the head and/or valve cover
bad bearings, lack of oil
You might have a problem with the torque converter or the lock-up relay.if it misses that could cause it to die. if it has a carburetor the idleing speed could be set to low
she could knock all the air out of it and cause it to die
engine misses could be bad plugs,incorrect ignition timing, cracked distributor cap, bad wires, vacuum leak, clogged fuel injector or filter, . engine backfires could be ignition timming, vacuum leak, EGR system not working, bad valves or valve springs.
No, but something that could cause uneven idle could cause the check engine light to turn on.No, but something that could cause uneven idle could cause the check engine light to turn on.
Just what she said, that she misses you! It could also mean she misses you because she LIKES you. Or, she could be tricking you, really she means that she hates you and never wants to see you again, saying she misses you is just the only way she can hide it. Cause that makes sense. ;)
A 2000 Silverado 5.3 Vortec that is hard to start and misses on one side of the engine might have a problem with the coil pack or the spark plugs. It could also mean that the block is cracked if the engine is prone to overheating.
Yes, just about any sensor on the engine could cause a no start.Yes, just about any sensor on the engine could cause a no start.
Have vehicle scanned to determine problem Could be plugged catalytic converter
A vacuum leak could cause that.
If an engine was not assembled properly it could cause a low power complaint.If an engine was not assembled properly it could cause a low power complaint.
The rough idle, loss of power on acceleration, check engine light, and misfire in your Mercury Capri could be due to several issues, such as faulty spark plugs or ignition coils, which can cause misfiring and affect engine performance. Additionally, a clogged fuel filter or failing fuel pump may restrict fuel flow, leading to power loss. Another possibility is an intake or vacuum leak, which can disrupt the air-fuel mixture. It's advisable to run a diagnostic scan to pinpoint the specific cause based on the error codes.