answersLogoWhite

0

Timing, wires Timing, wires

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

My 1992 Ford E 350 will not start.?

What is your question? What does it do? does it turn over? Does it have spark? Is it getting gas? We can help but we need you to be more specific.


1992 Chevy half ton 4wd 350 eng have spark and getting fuel but still wont start any ideas?

If you have the three things that you need Fuel, air, and spark then timing must be the culprit


What is the correct spark plug gap for a 1992 Ford Explorer?

.054 inch for your 4.0 L OHV engine


Won't start 1995 dodge neon?

if the car dont start then you should either check spark plug 314 or the igintion of the car has a sortage were it is not getting connection this happen to me in a 1992 cadolac


Toyota Previa 1992 won't start no spark?

check the Distributor.


What is the correct spark plug gap on a 1992 ford explorer?

.054 inch , according to motorcraft.com , one of Fords websites


What is the correct spark plug for a 1992 Ford Explorer?

For a 1992 Ford Explorer 4.0 liter OHV engine : fordparts.com shows : Motorcraft AWSF-42C ( copper ) or Motorcraft AWSF-42P-P ( platinum ) ( as of March 11 , 2012 )


Why won't my 1992 Dodge Stealth non turbo start that turns over and is getting spark and fuel pump is working?

i had the same problem i had spark n fuel..i changed the plugs and the car fired up so try changin the plugs


What do you do if a 1992 Suzuki Sidekick will not start?

Does the starter work? if yes is there spark ?if yes is there fuel?


Why wont my 1992 Ford Mustang start?

Does it turn over? Does it have fuel, spark, compression?


What do I check on a 1992 ford bronco 302 for an occasional misfire?

Start with distributor cap/rotor, spark plugs and spark plug wires.


Why getting no spark from 1992 Chevy Corsica 3.1 liter?

If getting no spark, it could be your spark plug wire is bad or your coil pack. say 3 and 6 getting no sparks, that means your coil pack is bad and you need to replace. if you getting no sparks after replacing new coil pack, it could be your ignition module.