Please let us know what you are needing help with your wires.
It has six spark plugs. if you ask auto zone or tell somone here whats going on than we can help. if you do not know, take the Jeep to auto zaon or other and they will tell you what you need.
40 Psi
WD-40
The 40. 1997 Jeep Wrangler needs 6 quarts of oil for an oil change.
35 to 40 psi
a little WD 40 should do the trick
I put 10 w 40 in my 97 4.0 liter wrangler now it sounds diffrent. I think it should have had 10 w30 . Manual calls for 10w30
I have a 1991 a 1992 and a 1993 jeep wranglers and all take 6 quarts of oilwith a new filter installed. I use 10-40 weight oil in all mine its good for all yearand all weather driving. Be sure to change every 3,000 to 4,000 miles if you loveyour jeep like I do. Jeep people are the coolest but you have to not have aproblem with getting it dirty. Jeeps like dirt and mud.
30-40 depending on what the computer has your gpm's at if the light comes on save yourself the embarrassment and start looking.
try some dry gas
Most likely your crankshaft position sensor. Starts out fine, then dies after 30 mins or so? Sit for 30, then ok? 40 bucks autozone
For Real? lol well for the new Jeep you must have a T-40(I think or T-50)Torx Wrench to unscrew the bottom bolts on the hinges and then once you've done that unhook the wiring running from the jeep to the door(a simple snap in and out function) and after that just lift up the door and.... SHAZAAM you done it!!!
To do it yourself, 30 or 40 bucks, for someone else to do it 2-3 hundred. Its all about the labor, brake lines and fittings are cheap, but that job takes time to do.