probably
yes
To change the serpentine belt on a 2003 Pontiac Bonneville, loosen the tensioner pulley and remove the old belt. The tensioner pulley is the wheel in the belt system that has a bolt through the middle in a slot that can be adjusted. Put the new belt on and tighten up the pulley.
Yes, I need a diagram of the serpentine belt for a 1997 3.8 liter Bonneville SE without a turbo charger.
advance auto if located in your area
just need to know where it is located on car
there is no difference between the 2..to be sure when u go to the parts store have him check it out..
take off serpentine belt unbolt powersteering pump and hoses and drain it. That's it.
A diagram for the serpentine belt for the 1995 Bonneville can be found in an Chilton's manual for that year and make of vehicle. The belt diagram varies depending on the exact vehicle engine type.
Removing the serpentine belt on a Pontiac Aztek requires loosening the adjustment pulley. Once the pulley is loose the serpentine will have enough slack to come off.
chain
help