0
1994 integra GSR transmission makes noice when clutch is not depressed just replaced clutch a few weeks ago?
Wiki User
∙ 17y ago
Maybe "throw-out" bearing Should have been replaced w/clutch
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
Which part does not rotate when the engine is running and the clutch is depressed?
Clutch disc, pressure plate, transmission shaft,
What causes a 1986 Acura Integra RS to not go into the next gear?
if u have a manual transmission ur clutch is going out n u need to change it, if u have a automatic ur transmission is going bad and needs to be replaced
Will a 98 Acura Integra manual transmission bolt up to a 92 model integra?
Yes, with one exception: the 92 Integra comes with a cable actuated clutch, the 98 a hydraulic actuated clutch. Hasport may have a cable to hydraulic converter kit.
Can a 1998 Acura Integra automatic transmission fit in a 1991 Acura Integra?
it will fit but you need to convert it to a cable clutch because the 98's are hydraulic
How do you change a clutch cable on a 1998 integra?
You don't. There is not a clutch cable on a 1998 integra. It has a hydraulic clutch.
Just replaced a tranny. Is it normal for the shift lever to be able to shift into all gears without the clutch being depressed. Something to do with the clutch slave cylinder pressure from bleeding?
Theres no pressure in the transmission yet. Once you start the engine it will be normal
What is the cause of manual transmission whine noise when the clutch is fully depressed?
Your throw out bearing is the problem.
Will a 1994 integra engine and transmission fit into a 1990 civic?
with modifications and a mounting kit, and a way to convert cable clutch pedal to operate the hydraulic clutch transmissionhasport.com
How do fix a transmission that is slipping in a 1999 Ford pickup?
if it has a clutch, the clutch needs replaced. if it's an automatic, it needs to be overhauled by a dealership or competent transmission shop.
Is 1990 Acura Integra hyraulic clutch or cable clutch?
cable clutch
Why would the clutch pedal of a 1987 Nissan 300ZX non turbo go to the floor and stay there when there was no slippage in the clutch during drive?
Clutch release bearing, if installed in this particular Nissan transmission (I don't know the specifics of this particular transmission), probably needs to be replaced. Clutch release bearing, if installed in this particular Nissan transmission (I don't know the specifics of this particular transmission), probably needs to be replaced.
What does clutch drag on a new clutch mean?
Clutch drag is when the clutch pedal is fully depressed and the clutch is still partially engaged. When the clutch pedal is released or in the up position the engine is connected to the transmission input shaft. When the pedal is depressed or in the down position the engine is disconnected completely from the transmission. When the clutch drags it is still partially attached to the engine. A dragging clutch can cause a glazed flywheel and premature failure of the clutch. It will also cause the syncros to work twice as hard to slow down or speed up a gear inside the transmission when shifting. Basically syncros will wear out faster than normal and may not work properly depending on how bad the clutch drag is.
