check the maintenance manual but all you need to do is unhook the power going to the light then take out the rubber linning and unscrew the retaining ring then replace lightbulb
Turn signal lever assembly can be replaced without removing the steering wheel. See instructions at the attached link question about replacing the headlight switch on a 1999 Subaru Forester.
On my Subaru Forester the instrument panel lamps are dimmed by turning a ring on the turn signal stalk.
On my 2000 Forester, the dashboard illumination dimmer control is on the turn signal stalk. --Ken
Look at the related link on why turn signals are not working for where the flasher unit is located.
behind the fuse box underneath the drivers side dash
how to replace high/low beam, turn signal lever on 1996 subaru outback wagon
To change the turn signal light in the 2003 Subaru Baja you need to have a tool box with the necessary tools. Open the screws to access the turn signal light and replace it.
It turns out the headlight switch is not a serviceable part on the Subaru Forester. Instead, the entire turn signal lever must be replaced (a $100 part). A brief description of how to replace the turn signal lever follows: First, remove the steering column cover. There are three screws underneath - remove those. Then release the steering column adjustment lever and leave it down. The bottom part of the steering column cover unsnaps from the top part and you should be able to remove it easily. The top part of the steering column cover can just stay there and be moved as necessary to gain access to screws. Next, remove two screws where the turn signal lever assembly attaches to the steering column. Remove the electrical harness and the turn signal lever assembly should just pull straight out. Reverse the process to put in the new turn signal lever assembly.
2007 Subaru Forester turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
2007 Subaru Forester turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
If the turn signals on your 2001 Subaru Forester aren't working, it could be due to a blown fuse, a faulty turn signal relay, or a burned-out bulb. Start by checking the fuse box for any blown fuses related to the turn signals. If the fuses are intact, inspect the bulbs for any damage or burnouts, and consider testing or replacing the turn signal relay. If these steps don't resolve the issue, it may be necessary to consult a mechanic for further diagnosis.
This is a Frost or Freeze Warning Indicatorsymbol. The snowflake symbol will come on in amber when the outside temperature drops to within a few degrees of freezing. At freezing or below, the symbol will be red.