Not sure what the 'brake actuator' is, but...
The "Related Questions" below address the brake on/off (BOO) switch mounted at the brake pedal.
There's also one about finding wiring diagrams. The short answer to that is Autozone's free Repair Guide. They have a surprisingly large collection of wiring schematics for Windstars.
If it's an actuator that works off an electrical circuit, apply electricity (the body of the device will be - or negative or ground if there is no - or negative or ground wire to the device)/ if it is a vacuum device, then you will need to apply vacuum to determine it it "actuates".
Bad door lock actuator , trunk lock actuator or worn wires rubbing on metal/vehicle ground.
Attempting to obtain step by step diagrams connecting an above ground pool to a sand filter.
fr3qw
where are the ground wires located where are the ground wires located where are the ground wires located
A seismograph is a diagram that shows the activity of an earthquake. The longer the line on the diagram, the more violent the shaking of the ground is.
Wiring diagram of trace the wires and find the black one leading to a ground source.
Check your fuses, if its not a fuse go to the dealer and see if they are nice enough to print you a wiring diagram and a ground location diagram, and find out what ground came loose.
I cannot provide a diagram, but it is simple. Power goes to the light, and the ground wire is use as an interupter on the door switch. The switch breaks the ground connection when the door is shut. So you should have power at the dome light if you just ground the circuit.
The diagram is a right-angle triangle with a ht of 115m and a base of 24m.
Hey there,If you stand in front of your Windstar and look at the steering wheel, follow it right down passed the hood almost the ground. There will be a tiny door you can open big enough for an extension cord. Good luck!
you will have to either buy a shop manual from the dealer or ask them if they will make you a copy of the diagram you need