Check the fuses under the hood, particularly the "pcm a" and "pcm b" fuses. If one of these is blown it will cause the condition described.
The empty vehicle weight of your 1998 Chevy Cheyenne step side pickup truck is stated as 4374 pounds. The empty vehicle weight does not include any fluids or accessories.
"Chevy truck" for that model year could mean anything from an S-10 pickup all the way up to a Top Kick 8500. You would need to be more specific about which exact vehicle you had in mind before this question could be answered.
with a full tank of gas the gauge will drop to "E" then after a few seconds it will jump back to correct reading.
If the master cylinder reservoir is empty, you have a leak somewhere. If the master cylinder reservoir is full, the master cylinder is bad.
If you have an empty item slot you can just right click on the item.
Drive it.....
replace the empty ink carriage
this is a problem with the gauge cluster. very common problem. you may also notice the neeedles moving very erratic at times. it is a common problem with s10/jimmy/blazers/sonoma
1040 KG EMPTY 2450 LOADED
225
I think, for empty and half load it's 32 psi (front and rear) and 35 psi for spare one. For full load, it's 35 psi.
you have to drop the gas tank it is located inside at the top of tank. OR YOU CAN UN BOLT THE PICKUP BED AND SLIDE THE BED BACK TO EXPOSE THE TANK. THIS WAY YOU DONT HAVE TO EMPTY THE TANK.