The 2013 Dodge Dart runs on regular unleaded.
The 2014 Dodge Dart runs on regular unleaded.
it's on the passenger side of the engine block, just follow the fuel line from the carb down and it screws directly into the fuel pump.
With a multimeter. The easy way is to unscrew, disconnect and remove the sending unit from the tank for testing. Once removed, connect the multimeter to the chassis of the sending unit and the isolated stud that was wired to the fuel a gauge. Depending on where the sending unit's arm is positioned different resistance values will result.
Take the 2 clamps off each end of the fuel line and pull the rubber hoses off the fuel line along with the old filter, put new rubber hoses on new filter and make sure arrow on filter is pointing towards carburetor and install rubber hoses onto the fuel line on both ends and tighten clamps on both ends.
The 2013 Dodge Dart runs on regular unleaded.
The 2014 Dodge Dart runs on regular unleaded.
MuscleCar - 2001 Dodge Dart Fuel and Fire 2012-14 was released on: USA: September 2012
The 2013 Dodge Charger runs on flex-fuel (FFV).
The 2013 Dodge Durango runs on flex-fuel (FFV).
The 2013 Dodge Grand-Caravan runs on flex-fuel (unleaded/E85).
The 2013 Dodge Avenger runs on regular unleaded.
The 2013 Dodge Journey runs on regular unleaded.
The 2013 Dodge Challenger runs on regular unleaded.
start by checking fuel delivery,if you do have fuel delivery proceed by checking the timing setting.
get a chiltons repair manual at the library for your car.
it's on the passenger side of the engine block, just follow the fuel line from the carb down and it screws directly into the fuel pump.