Is the 12V AC or DC?
If it's AC, you find a transformer that can step up voltage by approximately a factor of 10, and adjust the output as necessary (e.g. with a voltage divider).
If it's DC, then you can build an oscillator that runs on 12V DC and then put it into a transformer. Be sure to know how your oscillator's waveform is effected by the transformer.
I am in Manila and would like to make 1 220 volt receptacle into a 110 volt receptacle
thanks
DC to AC?? Invertor boxes are used in Autos. you need to know what the load of the device you are using to buy one that will work. Simply plug it in the cig lighter and there it is.
DC 12V power supply can convert 110/220V AC power source to 12V DC.
Use a 2.25 ohm 25watt ballast resistor;renault used them to drop the voltage for the Engine control computers.
The output voltage of 12V 5W solar panel is 12V. The current is 0,41667A. These values are normaly calculated with 1000W/m2 of solar radiation.
A == B (- 12V +) (- 12V +) (- 12V +) A single 12V battery in series with 4x 12V batteries connected in parallel... Total voltage from A to B is 24 volts! Note that the single battery in series will limit the total current capacity to that of a single battery.
One invert the function or a signal. the other is a pulse width modulator controller which are usually used to convert one source of power to another. As in 12v dc in 5v dc out or vice versa
DC 12V power supply can convert 110/220V AC power source to 12V DC.
if you have 12v dc then you can use a 4 ohm resistor
It convert 220v or 115 to -12v and +12v by using many components and step down transformer.
If you want to convert 24v AC into 12v Ac, it's simple. Just get a transformer to convert 24 volts into 12 volts. This is called a stepdown transformer. If you want to convert 24v DC into 12v DC, it's more complicated. First you have to change the 24v DC into 24v AC by a switching converter that changes DC into AC. Then you would use a stepdown transformer as in the former example. Once the 24v AC is converted to 12v AC, then you use a rectifier bridge to change the 12v AC into 12v DC.
A 12v inverter is widely used in the domestic electrical appliance world to convert a 12v system to a higher voltage. So in other words you can use any appliance on a 12v system as long as you have the proper inverter.
change all the light bulbs to 12v
How much current? Volts/Amps = Ohms. In your case Volts = 1.5
Simple use a 2.25 ohm 25watt ballast resistor;renault used them to drop the voltage for the Engine control computers.
can a 12v lawn mower sealed battery be charged with 12v battery charger use on cars
Volts * Amps = Watts 12V * A = 150W A = 150W/12V A = 12.5
Anything needing 12V to operate.
You need a fairly powerful DC power supply capable of delivering 12V at some amps.