Volts and frequency are two different values. Amps are found by the following formula; I = E/R, I = W/E, I = square root of W/R. None of these formula use 60 Hertz (frequency) in their calculations.
<<>>
In what wattage?
Solving for amps is: A=watts/volts
If you the given wattage and volts then you can compute for amps.
Ex. A=120watts/110Volts
A=1.09Amps
Please re phrase your question, these two values are not directly related.
There are zero amps in 60 Hertz.
15 amps
10 amps
0.583333333333
yes, 31watt divide 240v equals to 0.13amps.
It depends on the voltage source. watts = voltage * voltage / resistance and amps = voltage / resistance example 1: To produce 600W from a 120V source, you need a resistor of size 120V*120V/600W = 24 Ohm. This would pull 120V/24 Ohm = 5 amps. example 2: To produce 600W from a 240V source, you need a resistor of size 240V*240V/600W = 96 Ohm. This would pull 240V/96 Ohm = 2.5 amps.
Input: 110-240V AC, Output: 12V DC, 3.7A
10 amps
You need amps
In North America, the standard is 240V, 60Hz.
Most appliciances that are built for use with 220V would normally be fine with 240V. In most cases, they are also labeled 220-240V. Depending on how critical the application is, you should probably check with the manufacturer.
yes.
two hot one ground
This can not be answered with the information you have given. 60Hz does not relate the the current draw so wire size can not be calculated.
0.583333333333
yes, 31watt divide 240v equals to 0.13amps.
240v is equal to how many amps
Input: 110-240V AC, Output: 12V DC, 3.7A
It depends on the voltage source. watts = voltage * voltage / resistance and amps = voltage / resistance example 1: To produce 600W from a 120V source, you need a resistor of size 120V*120V/600W = 24 Ohm. This would pull 120V/24 Ohm = 5 amps. example 2: To produce 600W from a 240V source, you need a resistor of size 240V*240V/600W = 96 Ohm. This would pull 240V/96 Ohm = 2.5 amps.