Need to know the voltage. I = W/V.
The unit of power is expressed in watts, and the product of current (Amps) and voltage (volts) is power there fore if you multiply the amps and the volts give watts. so 20 x 240 will give you a 4800 watts of power.
watts are equal to amps times volts.
The power required to run a basic computer will be 1.35 amps for startup and .7 to .9 amps continuous. The power requirements to run an 17" monitor will be 3.5 amps startup and 1.5 amps continuous.
The forumla for power is: Power (watts) = Volts x Amps Therefore: Amps = Power/Volts So the answer to your question depends on the voltage in use. @230v: 0.14 Amps @24v: 1.33 Amps @12v: 2.66 Amps
500,000 watts/240 volts = 2,083.34 Amps (single phase)
36.6 amps maximum at 120 volts, but should not be loaded to over 29 amps. At 240 volts it will produce a maximum of 18.3 amps but never loaded to any more than 14.6 amps.
The unit of power is expressed in watts, and the product of current (Amps) and voltage (volts) is power there fore if you multiply the amps and the volts give watts. so 20 x 240 will give you a 4800 watts of power.
A 120V power supply connected to a 30 Ohm resistor will produce 120/30 or 4 amps of current.
amps like.. amplifiers? it depends on how many speakers you have. or amps like.. current draw? again. depends on your power needs, your power amps... ect
Aprox 12 amps.
watts are equal to amps times volts.
The power required to run a basic computer will be 1.35 amps for startup and .7 to .9 amps continuous. The power requirements to run an 17" monitor will be 3.5 amps startup and 1.5 amps continuous.
12 amps of electricity.
Amps is a measurement of current. Watts (or kilowatts) is a measure of power. To get the power from the current, you have to know the electrical potential or volts used to produce the current. Amps × Volts = Watts (or Current × Electrical Potential = Power). Incidentally, a kilowatt is 1000 watts, so you'll have to divide your answer by 1000. e.g. if your volts is 40, then 25 amps × 40 volts = 1000 watts. 1000 watts (divided by 1000) is 1kw or kilowatt.
There are 2 oxygen sensors.1 is in front of the catalytic coverter and 1 is located behind the coverter
The forumla for power is: Power (watts) = Volts x Amps Therefore: Amps = Power/Volts So the answer to your question depends on the voltage in use. @230v: 0.14 Amps @24v: 1.33 Amps @12v: 2.66 Amps
500,000 watts/240 volts = 2,083.34 Amps (single phase)