The power required to run a basic computer will be 1.35 amps for startup and .7 to .9 amps continuous. The power requirements to run an 17" monitor will be 3.5 amps startup and 1.5 amps continuous.
Each computer will have an amperage rating. Using 80% rule for continuous load you should not exceed 16 Amps total. You'll have to add in your monitor power as well. Your start up current can be slightly higher due to bringing discs up to speed. A typical desktop might draw from 2 to 3 amps. Depending on type a monitor may draw from 1 to 3 amps. A typical laptop may draw 1.5 amps from charger.
The average 17" LCD monitor will pull around 25 to 30 watts. At 120 volts this would equate to 0.2 to 0.25 amps.
watts are equal to amps times volts.
The forumla for power is: Power (watts) = Volts x Amps Therefore: Amps = Power/Volts So the answer to your question depends on the voltage in use. @230v: 0.14 Amps @24v: 1.33 Amps @12v: 2.66 Amps
There is no answer to that because the current in amps must be multiplied by the voltage to find the power in watts.
It depends entirely on your type of monitor and power supply, but you can figure on the average of 100 watts per amp (that's a generalization of course). If you have for instance, a 350 watt power supply, that means the power supply can put out 350 watts of power for the computer to use, but that's the low voltage components of the power supply. As an example, I have a CRT type of monitor that uses 2.5 amps but on my power supply, there isn't a rating tag, so I'd approximate it at 1 to 2 amps. People tend to confuse output watts as the draw of power from the AC voltage, but there are other variables that come into play. Yes, those variables are power supply efficiency, PFC but mostly follow ohms law.
Each computer will have an amperage rating. Using 80% rule for continuous load you should not exceed 16 Amps total. You'll have to add in your monitor power as well. Your start up current can be slightly higher due to bringing discs up to speed. A typical desktop might draw from 2 to 3 amps. Depending on type a monitor may draw from 1 to 3 amps. A typical laptop may draw 1.5 amps from charger.
Two - the power lead and the data cable that connects to your computer
The average 17" LCD monitor will pull around 25 to 30 watts. At 120 volts this would equate to 0.2 to 0.25 amps.
amps like.. amplifiers? it depends on how many speakers you have. or amps like.. current draw? again. depends on your power needs, your power amps... ect
Aprox 12 amps.
watts are equal to amps times volts.
12 amps of electricity.
There are many good computer monitor cable brands. Examples of good computer monitor cable brands includes the brands VGA, Mediabridge, DVI, and AmazonBasics.
The forumla for power is: Power (watts) = Volts x Amps Therefore: Amps = Power/Volts So the answer to your question depends on the voltage in use. @230v: 0.14 Amps @24v: 1.33 Amps @12v: 2.66 Amps
One of the most common accessories for computer monitors are webcams. Many monitors have them built right into them nowadays. As well, built-in speakers are also very common.
Check the power specs for your monitor at the Dell website. There are many. many Dell monitors.