The net effective resistance of the parallel devices is the reciprocal of (1/12 + 1/4). Hence 3 ohms.
=============================================
(Which actually looks strangely similar to the first answer above.
Could it be just coincidence ? I wonder . . . )
A resistance 'network' consists of a number of resistors connected together in series, or in parallel, or in series-parallel, or as a complex circuit. A 'complex' circuit is one that is not series, parallel, or series-parallel.
It does not contain unidirectional outputAnswerA purely resistive circuit is an 'ideal' circuit that contains resistance, but not inductance or capacitance.
When capacitors are connected in parallel, the total capacitance in the circuit in which they are connected is the sum of both capacitances. Capacitors in parallel add like resistors in series, while capacitors in series add like resistors in parallel.
in a parallel circuit resistance decreases increasing the current.
Depends. What did you want to measure? If it's voltage drop across the incandescent element, then you had better hook up your infinite resistance voltmeter in parallel with the lamp.
In principle, it is infinite. I have not connected a parallel circuit in ages.
If additional resistance is connected in parallel with a circuit the supply voltage will decrease?
No change in supply voltage as additional resistance is connected in parallel circuit.
A resistance 'network' consists of a number of resistors connected together in series, or in parallel, or in series-parallel, or as a complex circuit. A 'complex' circuit is one that is not series, parallel, or series-parallel.
It does not contain unidirectional outputAnswerA purely resistive circuit is an 'ideal' circuit that contains resistance, but not inductance or capacitance.
Two bulbs connected in parallel are brighter than two connected in series. The resistance of the circuit is lower, electrons can flow more easily.
A resistance 'network' consists of a number of resistors connected together in series, or in parallel, or in series-parallel, or as a complex circuit. A 'complex' circuit is one that is not series, parallel, or series-parallel.
If it is connected in series with a circuit then it might raise the resistance too high and fail the system. Parallel connection is a circuit is probably the best bet you have.
It depends on what you want to accomplish. If you want to decrease the resistance in a circuit, you would place the box in parallel to some other resistor. If you want to increase the resistance in a circuit, you would place the box in series.
An ammeter is connected in series. A voltmeter is connected in parallel. ammeter should always be connected in series instead of parallel becoz it is a low resistance device and we know that resistance is inversly proportional to current so more current will pass through it and if it is connected in parallel than it may get damaged
resistance inparallel decrease in value proportionally two resistance can be calculated as R1XR2/SUM OF R1+R2. many values can be calculated as a fraction 1/r+1/r2+1/3 ....and take the total sum reciprocal
The generator sees a resistive load of 3.0 ohms.