The cross section of cylinder along its length (parallel to the axis of symmetry has the shape of a rectangle.
Volume in cubic feet = cross-section area*length
length = volume/cross-section
A cylinder has a circular cross section, a rectangular prism has a rectangular cross section.
It depends on the inclination of the line of cross section. If it is at an incline to the sides and diagonal, the cross section is a point which becomes a line that increases in length, reaches a maximum, remains at that length and then shrinks back to a point. If it is parallel to a diagonal, the cross section is a point which becomes a line that increases in length, reaches a maximum and then shrinks back to a point. If it is parallel to a side, the cross section is a line of constant length.
You cannot have a 2d cylinder. The 2d cross section will depend on the plane of the cross section.
a rectangle.
Ellipse * * * * * At right angles to the length, it would be a circle. Along the length it would be a rectangle. Only a diagonal cross section would be an ellipse.
A cylinder is an object with a circular cross section at all points along its length (in other words a circular prism). Or put another way, it is a barrel shape.
A cylindrical segment, sometimes also called a truncated cylinder, is the solid cut from a circular cylinder by two (or more) planes. Hope this helps!!!
A section of a cylinder along its length. The cross-section will be a quadrilateral. There will be 4 straight edges where the quadrilateral meets the curved face, and two curved edges from the top and bottom of the cylinder.
The volume of a cylinder is the cross-sectional area of the cylinder multiplied by its length. The perpendicular cross-section of a cylinder is a circle.
A cylinder is a three dimensional shape with a uniform circular cross section and a finite length.
20 ohms
Volume = Length*Area of cross-section So area of cross section = 1962.5/25 = 78.5 units If the cylinder has diameter d then area of cross section = pi*d2/4 So d2 = 4*Area/pi = 99.95 square units. Then d = sqrt(99.95) = 9.997 units of length.
Volume in cubic feet = cross-section area*length
length = volume/cross-section
The centre of the cross-section, halfway along the length of the rod.