0
What else can I help you with?
What tells you inches on a planimetric map?
On a planimetric map, inches are typically indicated by a scale bar or a graphic scale, which visually represents distance on the map relative to actual ground distance. Additionally, the map legend may provide information about the scale in terms of inches per mile or feet. To measure distances directly, you can use a ruler or a scale to convert map measurements to real-world distances.
What is the meaning of a bar scale?
A bar scale is a graphic scale that visually represents the ratio between distances on a map or drawing and actual distances on Earth. It can be used to estimate the actual size of features or distances represented on the map.
If 54 inches equals 1 mile what would the scale on a map be?
Roughly 100:1, or 100 feet to the inch. A mile is roughly 5280 feet.
A blue print has a scale of one half inch to one foot on the blue print one wall measures 6 inches in height if h represent the actual height of the wall what is h?
To find the actual height of the wall represented by the 6-inch measurement on the blueprint, we can set up the proportion: (1/2 inch / 1 foot) = (6 inches / h feet). Cross multiplying gives us 1h = 12, so h = 12 feet. Therefore, the actual height of the wall is 12 feet.
In the U.S. Customary System distance is expressed in?
The units used are mainly inches, feet, yards, miles.
On a scale drawing of a museum two water fountains are 10 inches apart. The actual distance between them is 400 feet. On the same drawing the distance between two exhibits is 3.125 inches. What is the?
The scale is 1536 : 1
What is the map scale distance represented by the following actual distance if the scale is 1 inch 1000 feet?
1.5 feet
How would you find the scale factor of a drawing that shows a length of 4 inches when the actual is 8 feet long?
To find the scale factor, first convert the actual length from feet to inches since the drawing's measurement is in inches. There are 12 inches in a foot, so 8 feet is equal to 96 inches (8 feet × 12 inches/foot). The scale factor is then calculated by dividing the drawing length by the actual length: ( \text{Scale Factor} = \frac{4 \text{ inches}}{96 \text{ inches}} = \frac{1}{24} ). Thus, the scale factor is 1:24.
Find the actual length of a train if a model train that uses a scale of 7 inches to 90 feet is 35 inches long?
To find the actual length of the train, we can set up a proportion based on the scale. The model train is 35 inches long, and according to the scale, 7 inches corresponds to 90 feet. Therefore, we can calculate the actual length as follows: [ \text{Actual Length} = \left( \frac{90 , \text{feet}}{7 , \text{inches}} \right) \times 35 , \text{inches} = 450 , \text{feet}. ] Thus, the actual length of the train is 450 feet.
How would you find the scale factor of a drawing that shows a length of 4 inches when the actual object is 8 feet long?
To find the scale factor of the drawing, first convert the actual length from feet to inches since the drawing's length is in inches. There are 12 inches in a foot, so 8 feet equals 96 inches. The scale factor can then be calculated by dividing the drawing length (4 inches) by the actual length (96 inches), resulting in a scale factor of 1:24. This means that 1 inch on the drawing represents 24 inches in reality.
What tells you inches on a planimetric map?
On a planimetric map, inches are typically indicated by a scale bar or a graphic scale, which visually represents distance on the map relative to actual ground distance. Additionally, the map legend may provide information about the scale in terms of inches per mile or feet. To measure distances directly, you can use a ruler or a scale to convert map measurements to real-world distances.
On a scale drawing of a basketball court 1 inch equals 8 feet. What is the actual area of the basketball court if the scale drawing is 11.75 inches by 6.25 inches?
To find the actual area of the basketball court, we first need to calculate the dimensions of the court in feet using the scale. The length of the court in feet is 11.75 inches * 8 feet/inch = 94 feet, and the width is 6.25 inches * 8 feet/inch = 50 feet. Therefore, the actual area of the basketball court is 94 feet * 50 feet = 4700 square feet.
Jimmy has a diecast metal car that is a scale model of an actual race car. If the actual length of the car is 10 feet and 6 inches and the model has a length of 7 inches what is the scale factor of mo?
Fg
On a scale model of the worlds tallest buliding Empire measures 25 inches tall the sears is 29 inches tall if the actual height of empire is 1250 feet what is the actual height an feet of the seaRS?
1450ft
How tall is a tree that is drawn to a scale of one inch to 32 feet if the height of the tree in the drawing is six inches?
To find the actual height of the tree, you can multiply the height in the drawing by the scale factor. Since the scale is one inch to 32 feet, you would calculate 6 inches × 32 feet/inch, which equals 192 feet. Therefore, the actual height of the tree is 192 feet.
A blueprint for a fence has a scale of 140 ad the fence in the blueprint is 6 in what is the length of the actual fence?
To find the actual length of the fence, multiply the length on the blueprint by the scale. Given a scale of 1:40 and a length of 6 inches on the blueprint, the calculation would be 6 inches × 40 = 240 inches. Therefore, the actual length of the fence is 240 inches, or 20 feet.
On a blueprint the length of a wall is 5 centimeters if the actual length of the wall is 15 feet what is the scale of the blue print?
To find the scale of the blueprint, divide the actual length of the wall by the length on the blueprint. The actual length is 15 feet, which is equivalent to 180 inches (since 1 foot = 12 inches). The blueprint length is 5 centimeters, which is approximately 1.97 inches (since 1 centimeter ≈ 0.3937 inches). Therefore, the scale of the blueprint is 180 inches / 1.97 inches, which simplifies to approximately 91.4:1.
