answersLogoWhite

0


Best Answer

This connector is present on the Macintosh LC, LC II/Performa 400, IIci, IIsi, Quadra 700, Quadra 900/950, Macintosh Duo Dock, and Duo MiniDock. {| ! Pin ! Name ! Description | 1 RED.GND Red ground 2 RED.VID Red video signal 3 /CSYNC Composite synchronization signal 4 SENSE0 Monitor sense signal 0 5 GRN.VID Green video signal 6 GRN.GND Green ground 7 SENSE1 Monitor sense signal 1 (grounded internally) 8 n/c Not connected 9 BLU.VID Blue video signal 10 SENSE2 Monitor sense signal 2 11 C&VSYNC.GND Ground for CSYNC & VSYNC 12 /VSYNC Vertical synchronization signal 13 BLU.GND Blue ground 14 HSYNC.GND HSYNC ground 15 /HSYNC Horizontal synchronization signal Shell CHASSIS.GND Chassis ground |}

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: A video connector for a computer has a 15 pin 2 row connector?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Which adapter card uses a 15 pin 3 row port?

A Video Graphics Array (VGA) connector is a three-row 15-pin DE-15 connector. The 15-pin VGA connector is found on many video cards, computer monitors, and some high definition television sets.


3 row 15 pin female connector?

Assuming you mean the "D" shell connector used for computer "VGA" connections to a monitor.It's aD shell (physical appearance),E size,15 connectors,So it's correctly called a DE15, but is often misnamed "DB15" - which it's not. To lessen confusion, many people just refer to it as the "VGA" connector.The common "DB" naming only applies (correctly) to the larger shell size commonly used for the 25-pin DB-25 connector. The small 9-pin D connector is correctly called DE-9.


How many Skittles on back row in ten pin bowling?

In ten pin bowling, there are four pins on the back row.


How many pins does IDE standard connector have?

It depends, ones for hard drive are i think, about 40 pins, an less for the floppy IDE cable Desktop hard drives have "40" pin connectors; however, the actual number of pins is 39. There is one pin missing in the upper row, middle. I believe the reason for this is so the ribbon won't be connected upside down, it can only go one way.


What is a db9 connector on the back of the computer used for?

A DB-9 connector is a 9-pin connector, approximately 2cm long by 0.75cm wide, with two rows of pins or sockets, a row of 5 and, a row of 4, hence 9 pins total. It is often used in low-speed data communications such as RS-232, and is the connector on personal computers since the IBM PC-AT used for COM ports. There are larger versions with 15 pins, called DB-15 and used for game ports and 10Base5 network AUIs, and 25 pins, called DB-25 and used for earlier COM ports and printer ports among other things.


What is the front pin in bowling starting with king?

The one closest to you is the head pin, or 1 pin. The rest of the pins are numbered from left to right on each row: the second row has the 2 and 3, third has 4, 5 and 6, and the fourth row has 7, 8, 9 and 10.


What is the bowling pin in the back row called?

There are 4 pins in the back row, 7,8,9 and 10.


What vowels are on top row of the computer keyboard?

The vowels on the top row of a computer keyboard are usually "E" and "I".


How do you distinguish 184 pin from 168 pin memory?

While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins


What uses low density 2 row male DB-15 connector?

a joystick


What video game can you be a miner or thief in the game?

Saints row or saints row 2


In ten pin bowling how many pins are in the back row?

then 3 in next row 2 in the next and 1 in frontEdit: assuming you are referring to the 10-pin bowling, there are four in the back row, not five, as was previously answered by someone else.Considering the 5 + 3 + 2 + 1 = 11, it is fairly clear that the pins are not set up in that war.