answersLogoWhite

0

Don't think you can if it is fuel injected. Get a couple of cans of fuel injector cleaner from AutoZone and put them into the tank one can (bottle) at a time when you fill up the tank.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Where is the fuel pump for a 1991 GMC suburban?

fuel pump is locatedin the fuel tank. you will have to drop the tank to replace. I recently have done this on my suburban.


How do you adjust the fuel mixture on a 1992 Cadillac El Dorado?

The fuel mixture is controlled by the computer and is not adjustable.


How do you adjust the air fuel mixture on a 2003 Yamaha YZ125?

torque specs air fuel mixture screw on a yz125 2003


How do you adjust fuel mixture 1991 Mercedes 190e?

To adjust the fuel mixture on a 1991 Mercedes 190E, locate the mixture adjustment screw on the airflow meter. Use a multimeter to measure the voltage output while the engine is running; ideally, it should be around 0.5 to 1.0 volts. Turn the screw clockwise to enrich the mixture or counterclockwise to lean it, making small adjustments and checking the voltage until the desired level is reached. Always ensure the engine is at operating temperature during this process for accurate results.


How do you adjust air fuel mixture 1995 suzuki katana 600?

adjust the two fuel screws all the way in and adjust a half turn out until you get it right


Where is the fuel pump located on a 1991 Chevy 1500 Silverado Suburban?

In the gas tank.


How do you adjust the air fuel mixture on a 2005 Honda CBR 1000RR?

The CBR 100 RR is a fuel injected bike, you can not adjust the air fuel mixture, however if you change the exhaust you can sometimes get an aftermarket programmer that will re-map the fuel and timing. Hope this helps!


Why does the fuel pump run continuously on a 1991 suburban when ignition is turned off?

Need to replace fuel pump relay.


How do you adjust air and fuel mixture of Nissan Terano?

To adjust the air and fuel mixture on a Nissan Terano, you typically need to access the carburetor or the fuel injection system, depending on the model year. For carbureted models, you can adjust the mixture screws located on the carburetor. If it's a fuel-injected model, you might need to use an OBD-II scanner to check the air-fuel ratio and potentially adjust the fuel pressure regulator or replace the air filter. Always refer to the vehicle’s service manual for specific procedures and settings.


What is the purpose of the tangential slots in an oil burner?

They are to adjust the air/fuel mixture.


How do you adjust the fuel mixture and increase idle on a 1994 ford ranger?

Fuel mixture can not be adjusted it is computer controled.You can adjust the idle by removing the cover where throttle cable attaches to the throttle body and turning adjustment screw


Where is the fuel pump shut off valve on a 1991 suburban?

From what I've been told Chevy's do not have fuel shut off devices.