It is possible but impractical and may not be economically feasable. The labor fee to JUST to remove factory connectors and replace them with industry standard connectors would be cost-prohibitive, even with a factory schematic. Then you have to pay for system design and integration after that. It might be more economical to have the entire audio system replaced with an aftermarket system installed by car-audio professionals. If you still feel the need to replace the factory amplifier try to locate it's schematic by factory part number first then show that to some local electronics tecnicians who may be able to tap in to the original circuits for you. At least in this way you can do your own feasability study at minimal cost for the price of buying the schematics and presenting them for estimates. I am about to tackle a similar project on a Sebring convertible who's power amp took a bath and self-destructed afterwards. It looks like about a full week's work to me. GOOD LUCK.
Never haerd of a 10 ohm radio. There is no 10 ohm radio amplifier on the market, when you think that must be the output impedance of the amplifier. The output impedance of a radio amp is always less than 0.5 ohms. Scroll down to related links and go to "Voltage Bridging or impedance bridging - Zout < Zin"
There is no 8 ohm solid state amp. Really! The output impedance of such an amp will be arround 0.4 ohms. Scroll down to related links and look at "Interconnection of two units- Voltage Bridging - Zout < Zin".You can, as long as the amp's impedance is much lower to the speaker(s) total ohm load you're fine. We have never impedance matching there.
A1: The output impedance of a power amplifier is always less than 0.1 ohms. There are no 4 ohm amplifiers on the market! A2: I actually just bought a new car radio/CD player that specifically shows 4 ohm speakers on the sticker. It is designed to work optimally with 4 ohm speakers. If you use 8 ohm instead, it will work, but you will not get the full power output that is specified. The amp can only kick out so much voltage and so much amperage - if it is designed for 4 ohm speakers, and 200 watts (stereo, so 100 watts per speaker), it can supply 20 volts (P = V^2 / R). If you used 8 ohm speakers to this amplifier, each speaker would only get 50 watts powered at full output voltage. Alternatively, if it is designed for 8 ohm speakers and 100 watts per speaker, it can provide 40 volts. If you used 4 ohm speakers instead, each speaker could be given 200 watts at 40 volts, resulting in severe overheating and damage to the amplifier.
The global semiconductor packaging market size is projected to expand at a considerable CAGR during the forecast period, 2021–2028. The growth of the market is attributed to the increasing demand for consumer electronics in emerging economies.
a kind of market in California
The market value would depend on what year and model it is and the condition it is in. For example: a 2009 Chrysler Sebring Cnvertible Limited in excellent condition has a fair market value of $33,038.
I think it is
As of July 2014, the market cap for Infinity Property and Casualty Corporation (IPCC) is $749,879,759.38.
Sony has the best car amplifier on the market. These are typically more expensive as well.
Some of the latest models of Infiniti cars are ; Infinity EX35 which has a market price of between $32, 616 - $35,987, Infiniti FX35 has a market price of $41,007- $42375. However the Infiniti FX 50 market price is 56,255 .
The Replacement Killers grossed $19,035,741 in the domestic market.
There is no amplifier on the market with an output impedance of 2 ohms. The amplifier will have an output impedance as low as 0.05 ohms. In hi-fi we have always impedance bridging. Zout
There is really no amplifier on the market which has an output impedance of 4 ohms. The impedance of an amplifier is always less than 0.5 ohms. We do not use matching, we use bridging when we connect the amplifier to the loudspeaker. Scroll down to related links and look at "Interconnection of two audio units".
No the Macbook computers do not have an intergrated amplifier. You will have to buy and after market surround sound system.
The Q ratio is calculated as the market value of a company divided by the replacement value of the firm's assets Tobin's Q ratio
Yes, it is one of the best brands that is on the market today.
In the trunk under the rear speaker panel.