0
There is no 8 ohm solid state amp. Really! The output impedance of such an amp will be arround 0.4 ohms. Scroll down to related links and look at "Interconnection of two units- Voltage Bridging - Zout < Zin".
You can, as long as the amp's impedance is much lower to the speaker(s) total ohm load you're fine. We have never impedance matching there.
What else can I help you with?
Can you run 4ohm resistor to make 4 ohms speakers 2 ohm?
Yes, you can safely use a 4 ohm amp with one 8 ohm speaker, but you will not achieve full power. The 4 ohm amp is designed to supply a certain voltage into a 4 ohm speaker. Supplying that same voltage to an 8 ohm speaker will result in half the power, or -3dB. For maximum power, use a 4 ohm speaker, or two 8 ohm speakers in parallel.
What is better 16 ohms speakers or 8 ohms speakers?
It depends on the application. If you have an amp that is stable in 8 ohms per channel, then 8 ohm speakers will work best. However, if you wanted multiple speakers on that channel you could use two 16 ohm speakers.
Will wiring a 16 ohm woofer with a 16 ohm tweeter in parallel result in a total ohm load of 8 ohms?
If you mean as pairs, yes. put an 8 Ohm and a 16 Ohm speaker in parallel for each channel. The 16 Ohm speakers will take 1/3 the power and the 8 Ohm speakers will take 2/3 the power. The resulting impedance will be 5.33 Ohms.
Can you wire 2 16 ohm speakers to 16 ohms?
No. Two 16 ohm speakers connected together are either 32 ohms, if wired in series, or 8 ohms, if wired in parallel. You can, however, connect four 16 ohm speakers in series-parallel to get 16 ohms, with four times the power handling capacity of just one.
8 Ohm plus 8 Ohm equals?
16 Ohms. Yes 16 ohms in series. 4 ohms in parallel
Can you use a 6 ohm and a 16 ohm speakers with a 6 ohm amp?
No. Not and maintain good balance and dynamic range.
Can you put 4 ohms into 16?
Sure, If you mean your stereo has 4 ohm output and using 16 ohm speakers. The volume will be reduced somewhat by doing this, but it won't harm the stereo. If you have 4 ohm speakers and stereo is designed for 16 ohms you can do it ,but the amp will run hot and you may suffer damage at high volume to the amp.
Can you run 4ohm resistor to make 4 ohms speakers 2 ohm?
Yes, you can safely use a 4 ohm amp with one 8 ohm speaker, but you will not achieve full power. The 4 ohm amp is designed to supply a certain voltage into a 4 ohm speaker. Supplying that same voltage to an 8 ohm speaker will result in half the power, or -3dB. For maximum power, use a 4 ohm speaker, or two 8 ohm speakers in parallel.
What is better 16 ohms speakers or 8 ohms speakers?
It depends on the application. If you have an amp that is stable in 8 ohms per channel, then 8 ohm speakers will work best. However, if you wanted multiple speakers on that channel you could use two 16 ohm speakers.
Can an 8 ohm amp drive 16 ohm speakers?
Never heard of a 16 ohm hifi aplifier. All amplifiers have an output impedance of less than 0.1 ohm. We use always impedance matching with a low source impedance to the much higher load impedance. Scroll down to related links and read "Amplifier, Loudspeaker, and Ohms".
What is the recommended impedance matching between an 8 ohm amp and a 16 ohm speaker for optimal performance?
The recommended impedance matching between an 8 ohm amp and a 16 ohm speaker for optimal performance is to use a speaker with an impedance that is equal to or higher than the amp's impedance.
How can I safely connect an 8 ohm amp to a 16 ohm cabinet?
To safely connect an 8 ohm amp to a 16 ohm cabinet, you can use a series connection method. Connect the positive terminal of the amp to the positive terminal of the cabinet, and then connect the negative terminal of the amp to the negative terminal of the cabinet. This will result in a total impedance of 24 ohms, which is safe for both the amp and the cabinet.
How do you use 16 ohm monitor speakers with an 8 ohm powered mixer?
Just use it like an 8 ohm speaker or else connect two 16 ohm speakers in parallel to form an 8 ohm load. Parallel is positive to positive and negative to negative.
What considerations should be made when connecting 16 ohm speakers to an 8 ohm amplifier?
When connecting 16 ohm speakers to an 8 ohm amplifier, it is important to consider the impedance mismatch. This can affect the performance of both the speakers and the amplifier. It is recommended to use speakers with an impedance that matches or is close to the amplifier's impedance to avoid potential damage or distortion.
Will wiring a 16 ohm woofer with a 16 ohm tweeter in parallel result in a total ohm load of 8 ohms?
If you mean as pairs, yes. put an 8 Ohm and a 16 Ohm speaker in parallel for each channel. The 16 Ohm speakers will take 1/3 the power and the 8 Ohm speakers will take 2/3 the power. The resulting impedance will be 5.33 Ohms.
How do i Make a 8 ohm speaker 16 ohm?
You can't change the ohm load of a speaker. What you can do, is get a second 8 ohm speaker to run with that speakers in series and you will get a total ohm load of 16 ohms.To run them in series, simply wire the positive terminal of one speaker to the negative of the other speaker. One speaker will have an open positive terminal which you wire to the positive terminal on the amp, and same goes for the negative on the other speaker (to the amp's negative terminal of course).
Can you wire 2 16 ohm speakers to 16 ohms?
No. Two 16 ohm speakers connected together are either 32 ohms, if wired in series, or 8 ohms, if wired in parallel. You can, however, connect four 16 ohm speakers in series-parallel to get 16 ohms, with four times the power handling capacity of just one.
