stop cheating man do your homework you retard <<<< learn how to spell jackass
A dominant reading also known as an invited reading, is the desired effect of the text such as an advertisement. It is the most 'obvious' reading of the text according to the dominant stereotypes.
Ohms not current (amps) indicate continuity. If you have no continuity then you will read an open line condition (OL on meters). If you have continuity you will have some type of resistance reading in ohms. 0 ohms would indicate continuity 0 amps indicates no current flow.
You could have a short or it could just be that you are reading through a load. Take a lamp and check for continuity at the plug, with a bulb in the lamp you will get continuity, take the bulb out if you still have continuity then you have a short in the wire or the lamp. Same thing happens in the wiring of your house on a larger scale.
Remove the power then remove the fuse. With an ohmmeter put the leads on both ends and read the meter. If it shows "zero" then the fuse is good and can conduct electricity. If it shows anything else than the fuse is defective and needs to be replaced.
I recommend reading about "Survival of Fittest" and "Natural Selection" to answer your question. The answer to this question is VERY big. Well, if you want the simplest answer, diversity and selection of good traits within the population.
A dominant reading also known as an invited reading, is the desired effect of the text such as an advertisement. It is the most 'obvious' reading of the text according to the dominant stereotypes.
A dominant reading also known as an invited reading, is the desired effect of the text such as an advertisement. It is the most 'obvious' reading of the text according to the dominant stereotypes.
A reading impression is an individual's thoughts, opinions, or feelings about a book after reading it. It can include a person's reaction to the plot, characters, writing style, and overall impact of the book on them.
David Walliams and Enid Blyton are very interestin reading selection
Ohms not current (amps) indicate continuity. If you have no continuity then you will read an open line condition (OL on meters). If you have continuity you will have some type of resistance reading in ohms. 0 ohms would indicate continuity 0 amps indicates no current flow.
They were honest men
scim and scan
First, you have to set your VOM to continuity. The symbol looks like an arrow with a line at the end of the arrow. After that, touch the two probes to two areas and if they have continuity you will get a reading on your meter and some even beep. Don't worry about the number, if it reads anything at all it still has continuity.
the reading menu is the selection where you can find the latest books every year
You could have a short or it could just be that you are reading through a load. Take a lamp and check for continuity at the plug, with a bulb in the lamp you will get continuity, take the bulb out if you still have continuity then you have a short in the wire or the lamp. Same thing happens in the wiring of your house on a larger scale.
The author's tone in the reading selection is informative and impartial. They present information in a straightforward manner without expressing strong emotions or opinions.
Since we don't know what you've been reading - WE cannot help you ! This is obviosuly something only you can answer !