Probably electrical, you may have accidentally unplugged a connector.
Real easy. After removing the brake caliper, tap, if needed, the rotor loose from behind. By the way, I found out today the caliper cyclinders can be squeezed with a C clamp before the removal. This eases the whole process of the removing and reinstalling new pads.
How to find diagram for removing rear drum from a 2002 Cavalier
After removing and reinstalling the transmission in a 2006 Sienna, the transmission must be reprogrammed to ensure it shifts properly. This is done by connecting an automotive computer to the vehicle and resetting the parameters.
By removing the gear box , then reinstalling it and finally removing the old belt and replace by a new one.
No. Installing / reinstalling / removing a program has no bearing on your files.
Removing the instrument cluster on a Peugeot 206 is simple. You start with removing the steering wheel and then take out the dash board and then take out the instrument cluster.
You can remove the oil pan from your 2002 Chevy Cavalier, without removing the motor. The oil pan is held in place with retaining bolts.
The shift cable on an 01 Chevy Cavalier is replaced by removing the retaining screws, removing the cable from the shifter, and pulling it from the vehicle. A new cable can then be locked into place and bolted down.
The immobilizer on a Peugeot 207 can be reset by removing it and reinstalling. Another option is to install a new reader.
my 1996,2.2 cavalier has the canister behind the right headlite.It has to be removed by removing the inner right fender.
Removing dust and cobwebs.
how to remove rear brake drum on 1994 cavalier