A fuse is replaceable and comes in many different amperage ratings and iterupt types.
Answer 1 - Advantage of Cartridge Fuse versus "Inline" FuseThe only advantage I'm aware of is that it is much easier to remove to examine for condition, and thus easier to change/replace.
A fuse is a one-time device; once it is used, it is no good. A breaker can be reset.
Fuse-based FPGAS can be easily modified without change in its hardware structure.
An electrical breaker is dual function an electrical fuse just has one purpose.
In Magic: The Gathering, the Fuse mechanic allows players to cast two separate spells as one if they have both cards in their hand. This can create powerful combinations and surprise opponents. Players can strategically utilize Fuse by planning ahead and building their deck with complementary cards that work well together when fused. This can catch opponents off guard and give players a tactical advantage in the game.
A fuse is intended to be a weak link of thin wire that goes in series with a circuit. If the current becomes too high for any reason, the fuse wire melts and cuts off the supply. Without a fuse, the circuit will heat up until something else melts, which might cause a fire. So fuses are necessary to prevent electrical fires.
Current limiting is the practice in electrical or electronic circuits of imposing an upper limit on the current. The simplest form of current limiting in mains is fuse.
A fuse protects a circuit from short circuiting. Also a breaker is used for this same purpose with the additional advantage of protecting the circuit from overloads also.
one primary advantage is that when a breaker trips you just reset it and go. When a fuse blows you have to replace it if you have one on hand. the real question is what are you trying to protect the the over current protective device? (fuse or breaker) each of these devices have a unique curve that explains how they will react to a fault condition. the time it takes for the device to trip is typically critical in deciding which to use.
A fuse might be a bit cheaper and the form factor may smaller if size is an issue. If the fuse blows on a regular basis it will of course end up costing more and will be more inconvenient to replace.
What is the Advantage and dis advantage of TCP/IP
It is usually fuse number 12 in the fuse box and is a 7.5amp fuse.