in most options no, wile they may be great for one or two sounds, Marshall has had such a large array of tones and amp lines that make them the most versatile and renounced amp.
At a specific voltage the higher the amperage the higher the rated horsepower of the motor. You will see the amperage rating used when manufactures sell hand tools. A saw that draws 12 amps, it is stated, is better than the saw that draws 9 amps. As the question stands a comparison can not be made between voltage and amps.
To apply power to a load greater that 15 amps and smaller than 30 amps.
You should never try to use more than 15 amps through a 14 gauge wire.
No, because 15 Amps is 2.5 Amps more than 12.5 Amps, so how can they be the same? It would be interesting to know exactly why you asked this question: is it really about a home electric appliance or a motor or something else which takes electrical power? Please explain what your question is about by logging in to WikiAnswers to improve this answer - by adding some text here - and then, maybe, someone else may be able to give you a much better answer than this one!
In the electrical trade the only time there is a reference to start and running amps is when dealing with motors. The running amps is always lower than the starting amps. A 78 amp electric furnace will take a 100 amp service for it to operate and be within the electrical code guide lines.
yes you can but there is more than one marhall so there are in some marshalls but some might not
The higher the better as long as it fits
Higher is better because a speaker will be able to play louder with not as much power. Then you can choose from a wider variety of amps.
Thats really an opinion both brands are good amps and both are tested to show their correct wattage if not more than
On a closed back amp, more of the sound comes out thru the front of the amp, as opposed to escaping out the back of an open back amp.
No.
Slightly more than 11 amps. <<>> I = W/E I = 2500000/220 = 11364 amps
Toys r us,Target,Walmart,possibly Marshalls
GSM provides a better speech quality due to the fact that it is the per user bandwidth that GSM can provide. D-AMPS bandwidth is 24.96 MHz and GSM is 24.8 MHz.
Check the number of amps that your circuit can handle. You should not put devices with more than that many amps (total) on that circuit. Most houses are 15 amps and bathrooms 20 amps.
Typically 75 amps on natural gas, 85 amps using propane. Peak amps(for less than a second) to start a big appliance, like an A/C condenser, are 130.
To apply power to a load greater that 15 amps and smaller than 30 amps.