0
SATA is ATA, but there are many ATA. SATA is an acronym for Serial AT Attachment, AT being the successor to the PC standard of desktop computers. There are many ATA standards, lots, but short answer is they are outdated Paralel, so we coined a new term to cover all the old ATA devices: PATA.
What else can I help you with?
What is the difference between a serial and a sata hard drive?
A serial hard drive is the same as a SATA hard drive. SATA is Serial ATA, and PATA is Parallel ATA.
Which is More expensive ATA or SATA?
SATA (Serial ATA)
What is ata in SATA?
According to http://acronyms.thefreedictionary.com/SATA, it stands for "Serial Advanced Technology Attachment." The "ATA" in "SATA" therefore stands for "Advanced Technology Attachment."
Full form of ata hard disk drive?
full for of ata sata
Can you install one ATA hard drive and one SATA hard drive in the same computer?
Yes.
What are four ATA standards for interfacing with hard drives?
paralell ata ,serial ata, eide,ultra ata...etc paralell ata ,serial ata, eide,ultra ata...etc paralell ata ,serial ata, eide,ultra ata...etc paralell ata ,serial ata, eide,ultra ata...etc paralell ata ,serial ata, eide,ultra ata...etc
Does IBM thinkpad r51 has sata hard disk?
No, it does not have SATA instead it has older standard ATA. They are not interchangeable.
Is Serial ATA interface and sata 3 the same?
Serial ATA (SATA) is a standard interface used for connecting storage devices like hard drives and SSDs to a computer's motherboard. SATA III, also known as SATA 6 Gb/s, refers specifically to the third generation of this interface, which supports data transfer speeds of up to 6 gigabits per second. While all SATA III devices are part of the broader SATA interface family, not all SATA devices are SATA III; earlier versions, such as SATA I and SATA II, have lower speed limits.
What are 3 samples of a Hard disk?
SATA , ATA and SCSi
What is a 3.5 inch SATA?
3.5 inch refers to the width of the drive. SATA (serial ATA) is the drive interface.
What is the meaning of SATA in ICT?
That is Serial ATA. The ATA stands for Advanced Technology Attachment. The standard was called ATA until there were serial ATA drives, then the old way became known as PATA or Parallel ATA. The problem with the old ATA standard was that with the 40 pins, it was difficult to go faster than 133 MB/S. Keeping the same instruction and data format, but converting to a serial data standard allowed the data rate to be safely increased to 150 MB/s. Now the 3rd generation of SATA allows a data rate up to 600 MB/S.
What tiny card do you use to install a parallel ATA device to a serial ATA controller?
To connect a parallel ATA (PATA) device to a serial ATA (SATA) controller, you would use a PATA to SATA adapter card. This small card allows the older PATA interface to communicate with the newer SATA interface, enabling the use of legacy devices with modern motherboards. The adapter typically plugs into the SATA port on the motherboard, while the PATA device connects to the card.
