They can be connected to either supply. A bulb in series that fails, will cause all the other bulbs to go out. A bulb in parallel that fails, will have no adverse effect on the other bulbs in that circuit
No. They are connected in parallel with each other.
The lamps will get dimmer. In a parallel circuit, voltage is constant. Whereas, in a series circuit, amps are constant.
You can use the coffee machine, and not have to turn on the entire house because the whole house is not controlled by one series circuit.
Adding additional lamps has no effect on the supply voltage supplied to you home. If the lamps are connected in series, then the sum of voltage-drops appearing across each lamp will equal the supply voltage. If the lamps are connected in parallel, then the voltage across each lamp will equal the supply voltage.
this depends on 1. whether the extra bulbs are being connected in parallel circuit or in series with each other, and 2. the power rating of the battery. supposing the battery power rating is greater than all the individual bulbs put together, the bulbs will glow the same maximum intensity if they are connected in parallel, and will become dimmer if connected end to end i.e in series.
If you are referring to house wiring, then you don't normally connect lamps in series with each other; they are normally connected in parallel with each other. When lamps are connected in parallel, each lamp is subjected to the same voltage; providing this is the rated voltage of each lamp, them each will operate at their rated power.If you did connect lamps in parallel, the you would find that the lamps with the higher power ratings will be dimmer than the lamps with the lower power ratings -which is not what you might expect!
No. They are connected in parallel with each other.
The lamps will get dimmer. In a parallel circuit, voltage is constant. Whereas, in a series circuit, amps are constant.
more current will be in case of parallel because in series combination resistence is greater with respect to parallel combination
You can use the coffee machine, and not have to turn on the entire house because the whole house is not controlled by one series circuit.
-- Connect the cells in series. The two terminals of their series combination present a potential difference of 4 volts. -- Connect both lamps in parallel between the terminals of the series-connected cells.
if the lamps are standard edison or medium they may be parallel lamps smaller than your finger are series
Lamps connected in parallel are subject to the same voltage. Provided this voltage corresponds to the lamps' rated voltage, then each lamp will operate at its rated power and at its full rated brightness.Individual lamps connected in series operate below their rated voltage (the sum of the voltage drops around a series circuit equals the supply voltage) and will, therefore, operate below their rated power and brightness. The lamps will vary in brightness; those with the lower power ratings will be brightest and those with the higher power ratings will be least bright.
Adding additional lamps has no effect on the supply voltage supplied to you home. If the lamps are connected in series, then the sum of voltage-drops appearing across each lamp will equal the supply voltage. If the lamps are connected in parallel, then the voltage across each lamp will equal the supply voltage.
If lamps were connected in series, if one light blew out, the entire system would shut down.Although this is true, the main reason is that, by connecting each lamp in parallel with each other, each is subject to the same voltage*. And the power rating of a lamp only applies when it is subjected to its rated voltage.(*The voltage across each branch of a parallel circuit is identical.)
street lights are connected in parallel mostly because if any lamp stops glowing but the other lamps continue their glow
For a lamp to operate at its rated power, it must be subjected to its rated voltage. Provided this is the case, then it doesn't matter whether lamps are connected in series or in parallel. For example, ten identical lamps, each rated at 12 V, will operate normally if connected in series across a 120-V supply (this is because they will each be subjected to a voltage drop of 12 V). They will also function normally if they are connected in parallel across a 12-V supply.