Yes, as long as it is the same size wire or larger as the hot and neutral wires.
lights can be wired any way round, there is no positive or negative
If the electrical box is grounded, check with a tester, the "hot" wire will have a voltage to the the grounded box the neutral wire will not. If the box is not grounded, with the breaker supplying the voltage turned off, use a tester on the resistance scale to check for continuity between the wires and a cold water pipe or some other grounded medium. The neutral will have continuity between the wire and a ground the "hot" wire will not.
both
A light fixture will function normally either way. The hot and neutral wires are interchangeable. DANGER! This is only true of lighting fixtures!
Hot is positive.
As a rule of thumb white wires are neutral and colored wires are hot. This cannot be taken for granted though as it can and has caused serious injury. The wisest thing to do whenever you are unsure is to just test the wire that way there are no surprises
Yes, as long as it is the same size wire or larger as the hot and neutral wires.
35 ampRefrigeratorRun a hot wire to the positive wire on the radiator fan
lights can be wired any way round, there is no positive or negative
If the electrical box is grounded, check with a tester, the "hot" wire will have a voltage to the the grounded box the neutral wire will not. If the box is not grounded, with the breaker supplying the voltage turned off, use a tester on the resistance scale to check for continuity between the wires and a cold water pipe or some other grounded medium. The neutral will have continuity between the wire and a ground the "hot" wire will not.
both
A light fixture will function normally either way. The hot and neutral wires are interchangeable. DANGER! This is only true of lighting fixtures!
Yes two "hot" wires and a neutral can enter into a switch box. This is done on occasions where a three wire enters a switch box, drops off one circuit for the lighting and the other "hot" wire carries on to feed a receptacle circuit.
The white is neutral. The house does have a neutral wire even though it may be black. One of those black wires is the neutral and the other is the hot wire. You will have to determine which is hot and which is neutral. You can easily do this with a voltage tester. The wire that lights the tester is the hot. When you wire the light simply wire the hot to hot, and the white and green to the other wire.
A table lamp using AC (alternating current) does not have a positive wire, but many will color-code the wires white and black within the circuit. <><><><> As said, no positive and negative, but there IS a hot and a neutral. The hot wire may have ridges running the length of the insulation (or be colored black if separately insulated). The hot wire connects to the brass colored screw, and feeds power to the base of the bulb. Yes, will work if reversed, but is not according to electrical code. White or unridged wire connects to silver colored screw, which connects to the shell of the bulb base.
Brown = Hot Blue = Neutral Yellow/Green = Ground