No they aren't. They both run on different tracks because of this :-)
The width apart of rail tracks are set to the gauge of the trains and carriages that are allowed to run on those tracks. They are kept in position by wooden sleepers, though concrete sleepers are often used nowadays.
yes - in fact Brio came up with the original defacto "standard" (track width, connectors, etc) in the late 1950's and it's probably more correct to say that (wooden) Thomas train sets (that first came out in the early 1990's) are compatible with Brio. The IKEA wooden trains and tracks are also compatible. The only real problem being that the bridge on the IKEA set is too low for the Thomas trains to fit under.
Gauge by: Andrea Burke
If the tracks are not parallel, the wheels will not stay on the tracks; train wheels are spaced at a fixed width, or gauge, and that width cannot expand or contract to accommodate non-parallel tracks. Thus, if the tracks were non-parallel, the wheel would come off the track and cause a derailment.
The dimensions of the small wooden crate are its measurements in terms of length, width, and height.
One result of the effort to standardize the width of tracks was the increase in interoperability and efficiency of train operations. Standardized track width allowed for seamless movement of trains across different networks without the need for costly modifications or transshipment.
Track width is a measurement of the distance between the inner edges of a pair of railway tracks. This measurement is important for determining the load-bearing capacity of the tracks as well as the types and sizes of trains that can use the tracks. The width of the tracks is also important for the maneuverability of the trains as the width of the track will determine the amount of space available in the curves of the track and the degree of curvature that can be achieved. There are several different ways to measure track width including: Standard Gauge (SG) - This is the most common track width in the world and is measured as 4 feet 8.5 inches. Broad Gauge (BG) - This is a wider track width and is measured as 5 feet 6 inches. Narrow Gauge (NG) - This is a narrower track width and is measured as any width below 4 feet 8.5 inches. Mixed Gauge (MG) - This is a combination of both Standard and Broad Gauge tracks on the same line. The track width is also important for the layout and design of the railway as the width of the track will determine the amount of space available for the construction of the railway as well as the amount of space available for the installation of signals switches and other track infrastructure.
length times width times depth
It is called a gauge. The North American railroad system's gauge is 4 ft. 8 1/2 in. in width. It is the width of a Roman chariot.
The dimensions of the small wooden crate box are 12 inches in length, 8 inches in width, and 6 inches in height.
There are 10 small cubes along the length, along the width and along the height of the big cube. There is, therefore, 10*10*10 = 1000 cubes.There are 10 small cubes along the length, along the width and along the height of the big cube. There is, therefore, 10*10*10 = 1000 cubes.There are 10 small cubes along the length, along the width and along the height of the big cube. There is, therefore, 10*10*10 = 1000 cubes.There are 10 small cubes along the length, along the width and along the height of the big cube. There is, therefore, 10*10*10 = 1000 cubes.
100 meters (the total track is 400 meters around) for outdoor highschool tracks