They could be. Depends on how they were built.
to use 4 wheel drive,both front and rear ends must have same gear ratio. if you dont want to use 4 wheel drive,u can change rear ratio,but remove front drive shaft so as not to accidently engage 4 wheel drive and trash your transmission
it will be the same as the rear diff
It could, if they have the same gear box.
It could have the same ratio or it could not.
With a chain drive the driven wheel will always rotate in the same direction as the drive wheel, but in a gear drive the direction of rotation will change between drive wheel and driven wheel.
Sometimes, but most of the times first gear is stronger than rear. A 4 wheel drive vehicle must have the same gear ratio in the front and rear differentials including the rim and tire size on all four corners.
When one gear is used to drive another, the number of teeth on each gear will factor into the ratio. Even if the number is the same it will have a 1 to 1 ratio. In a rear axle, for example, a common ratio is 41 teeth on the ring gear (driven gear) and 11 teeth on the pinion gear (drive gear). 41/11 is 3.727272 or commonly called a 3.73 to 1 ratio. It take 3.73 turns of the drive gear to get one turn of the driven gear. If you are interested, the different ratios provide different combinations of speed and power. Thus a large gear pulling a smaller one gives speed while a smaller gear pulling a larger one gives power.
As long as they are the same gear ratio they interchange also All wheel drive astro vans front diff will work
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
same as drive gear
Yes, if you change the gears in the differential that drive the axles and wheels. The lower the gear ratio, the faster the car will go with the same engine RPM. Example: A car with a 3.55 to 1 ratio differential will go faster than one with a 4.1 to 1 ratio differential at the same engine RPM.
Nothing really. But remember that the front and rear ring and pinion MUST be the same gear ratio. You didn't say if the Z71 was a 4-wheel drive. If it is not then you will either kill the engine power are may even increase the power.That depends on the gear ratio in the 3/4 TON rear end and the 1/2 ton rear end. / DIFFERENCE Low gear verses high gear. Low gear= Power. High Gear = No power.