No it well not work at all. Sentra 1991-1994 Stanza 1990-1993 and also the torque converter well not bolt up at all. Generally that answer is correct, however, it's not an end all answer. For one there is the assumption of an automatic, and 2 it's considering 100% factory bolt in's. Going by that thinking you cannot stick the engine from a 95 or 96 Sentra into an 88 Sentra, or the engine from a newer Stanza into an 88 Sentra. Lots of thigns don't bolt right up including the wiring. However, alot of people have done it, without a whole lot of knowledge. Most of them are evenw illing to share all their notes including wiring. Head to nissanforums.com, and look into the B12 Sentra forum, you might find what you need in there.
Follow the Link below and see is the Best Answer Hope It Helps. ----
Nissan Stanza was created in 1977.
5W30 5W40 10W30 are all recommended for Nissan Stanza
There is no 2001 Stanza. The Stanza became an Altima in 1993.
The 1990 Stanza has a chain.
E.C.C.L. CRUISE CONTROL! In Nissan!
The starter on a 1988 Nissan Stanza can be found on the inner side of the engine. It is between the gear box and the engine block.
To bleed a clutch on a Nissan Stanza, you need to find the bleed-off valve, usually somewhere near the slave cylinder.
The temperature sensor on a 1987 Nissan Stanza is located on the rear of the radiator. It is about one-third of the way down from the top.
2,788 lbs.
i need the diagram for 1991 Nissan stanza xe camshaft
You can get a 1987 Nissan Stanza Wagon body kit at auto part stores. You can also check with a certified dealer.