bosch makes 120 volt clothes dryers...
Additional answer:There are many clothes dryers that will operate on 110 volts - and they are usually ones with gas heaters. These include Maytag, Whirlpool, Kenmore, GE, Hotpoint, Haier, LG, Samsung and others.No. There are no "adaptors". To get 240V from a 120v supply you use a 120-240V step up transformer. <><><> Clothes dryers, water heaters and and other high-power 240 volt appliances cannot be run on a transformer from a 120 volt circuit. They must be powered from a separate branch circuit that has the right size breakers, cable and socket outlet to suit the appliance.
Can you use a 120 volt bulb in a 130 volt socket?
In the US, Canada and other countries running a similar 60 Hz power supply service, household lighting and low-power appliances run at 120 volts plus or minus 10%. So the actual voltage supplied can change betwen 108 volts and 132 volts and would still be within proper limits. (To get the actual figures for your locality it is best to ask a local licensed electrician or your local electricity supply company.) But please note the above answer is for low-power appliances only, not clothes dryers. Dryers have to draw a much higher current or amperage than your normal 120 volt socket outlets can supply. For more information on installing a new breaker, circuit wiring and the correct socket outlet to suit a 120 volt dryer, please see the answers to the Related questionsshown below.
You must set the range so that the maximum value is greater than the conventional voltage levels in your house. Like, in the United States, the common voltage level is 120 volts RMS, although many homes are equipped with 240-volt service, to accommodate certain appliances, like clothes dryers. (The 240-volt service is really two 120-volt legs.) It's a good idea to set the range higher than expected initially.
You tell yourself the 125 volt receptacle is a 120 volt receptacle. They're the same thing.
If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
Use a volt meter Plug a 120 volt accessory into it
Yes. But not the other way. 120 volt one, cannot withstand 220volt.
If the dryer is a clothes dryer then the short answer no. If it is a hair dryer then there might be a voltage switch on the handle that allows you to change voltages. If the manufacturer of the clothes dryer specified that it can be operated on dual voltages then it is just a matter of changing a few terminal connections. Check the instruction manual to see what it states there. This is very unlikely though. In North America all clothes dryers need 120/240 volts to operate. The 120 volts is used for the timer relays and for the drum motor, the 240 volts for the heating elements in the dryer. By changing to a higher voltage, it will not speed up the speed up the drying time. It is more likely that if you plug the dryer into the 240 volt receptacle it will burn the 120 volt motor out.
No totally different
Yes, the voltage listed on the bulb is the nominal voltage and it will work perfectly on a 120 volt circuit.
Yes.