0
What else can I help you with?
Can you use a 120 volt lamp where a 240 volt lamp was used?
No, the bulb would last about 5 seconds... if that.
Can i use led lamp 120 volt in 220 volt?
No, a 120-volt LED lamp should not be used in a 220-volt socket, as it can cause the lamp to fail or even pose a fire hazard. The voltage difference can damage the lamp's internal components. If you need to use a 120-volt lamp in a 220-volt environment, consider using a step-down transformer or a voltage converter designed for this purpose. Always ensure compatibility to avoid safety risks.
Can you use a 120 volt - 500 watt bulb in a 220 volt lamp?
no , it will burn out
Can you use a 125 volt bulb in a 120 volt lamp?
Yes, the voltage listed on the bulb is the nominal voltage and it will work perfectly on a 120 volt circuit.
Can you make a 230 volt fluorescent lamp work in a 120 volt socket?
No, do not waste your time.
A 60-watt 120 volt lamp requires morecurrrent than a 40 watt 120 volt lamp?
Yes. A 60W bulb has a higher resistance than the 40W buld. The extra resistance requires more current to light up the bulb. The fillament then glows brighter.
What is the resistance of a 120 volt lamp draws 0.25 amperes of current?
v/i=r so 120/0.25=480 480 ohms is the resistance
Can a 120V light fixture be used in India?
It can be if you connect two same watt lamps in series with each other. The 240 volt supply will drop 120 volts across each lamp.
When plugged into a 120 Volt source which will draw more current A lamp with a thick filament or a lamp with a thinner filament?
A lamp with a thinner filament will draw more current when plugged into a 120 Volt source. This is because a thinner filament has higher resistance, and according to Ohm's Law (I = V/R), the current (I) increases as resistance (R) decreases for a given voltage (V). Therefore, the lamp with the thick filament, having lower resistance, will draw less current compared to the lamp with the thin filament.
Can you use a 145 volt bulb in a 120 volt lamp?
No, a light bulb rated to work in a 120 volt lamp will not work properly in a 12 or 24 volt low volt lighting fixture. I don't believe it will harm the fixture. If you did get a 120 volt light bulb to fit into a low voltage light it would probably just be dim.
How much power is used by a 120-V car battery that draws 0.5 A of current?
Cars do not have 120 volt batteries. They are 12 volt DC.
Can you plug a 250 volt lamp into US outlet?
Yes. If the plug (cap) end of the 250 volt lamp is compatible to the receptacle the lamp would work. The light output of the lamp would not be very bright. Because the working voltage is halved so would the light output.
