0
Add your answer:
Earn +20 pts
Where can you buy a Xerox phaser?
One can purchase a Xerox phaser several places. One can go to the electronic stores and buy a Xerox phaser directly. But one can also choose to purchase online. On the Internet one can for example visit the Xerox website and purchase one from there.
What element is Use in xerox toner?
Xerox toners contain primarily plastic, coloring agents and small amounts of charge control and melting control agents. Therefore the vast majority of elements in Xerox toner are hydrogen and carbon atoms. Selenium, a black, non-metallic semiconductor, is not used in making Xerox toner. It was used in older forms of photoreceptor.
What is the average price of a Phaser 8500 by Xerox?
The Phaser 8500 was released by Xerox in 2005 and was made to retail at under $1000. However because this is now an older model one can typically be bought for anything from $500 - $700.
How can you tell a piece of metal is very old?
Most older metals will be somewhat dull from wear or corrosion- but new metals can be aged to make them look older.
Banks that offer car loans for salvage titles?
Few, if any will give you a loan. That's why it's best to either avoid high-priced salvage cars or buy older cars that have been totaled with cash - it doesn't take much to total an older car these days and the damage could simply be cosmetic. Some Prior salvage cars are even better than clean title. Prior Salvage and Clean Title difference is only that one title shows that the car was in accident and Clean Title will never show it - even if it was in worse accident. Like some say you will have problems with Prior Salvage Title, it is NOT true though.
The black form of this nonmetal conducts electricity better when light is shined upon it and it is used in Xerox toner?
Selenium is the nonmetal that conducts electricity in its black form when light shines on it. But selenium is not a component of Xerox toner. Selenium is used in the older photoreceptor drums and belts that serve as the equivalent of film in a camera.
How do you make homemade black toner powder for a Xerox photocopier?
The process of making black toner for a Xerox photocopier is very exacting, even for the older machines. If you could get all the ingredients, some of which are not easy to find, and you tried to make it at home what you made would probably not work in the machine because of the need to precisely control the size of the toner particles.
Why is buying a salvage title car bad?
It's not necessarily bad. I have purchased salvage cars twice with fine results. It all boils down to why it was declared a total loss by the insurance company. Older cars are easily totaled, even a minor fender bender can turn an older car into a salvage vehicle since older cars are worth less and if the damage costs more than 75% of the car's value the insurance companies total it. Now a newer car with a salvage title spells trouble since that could mean the car sustained over $15K in damages and that's major. You just need to know why the car was totaled, have it inspected by a mechanic, don't pay too much (it's worth roughly 60% of a comparable car with a clean title) and run it til it dies since they are harder to sell than clean titled cars. Still, I've purchased a Toyota and a Volvo with salvage titles and they are the best running cars I've ever owned. People always say run from salvage cars,which is a blanket statement that is often untrue and unfair. Consider this: $4000 in rear end damage on a new car = no salvage title. Same damage on an 8 year old car = salvage title. Same damage, different titles. Lesson: A clean title does not mean a clean car. At least with a salvage title the truth is up front.
How can you tell if a title is salvage or not?
The best thing to do when buying a used car is to run a Carfax or, if the car is titled to the state you live in call the DMV with the VIN or title number. There are ways to hide a salvage title from state to state so do the legwork! If you still like the car and are pretty sure it has a salvage title it may still be an ok car, especially if it's older since it doesn't take much more than cosmetic damage to total an older car. Just have a good pre-purchase inspection and don't pay more than 60% of the value of a comparable car with a clean title.
Getting the Most out of Salvage Trucks?
Salvage trucks can be the best sources of parts and accessories for restoring an older model of truck. Salvage trucks are also great resources when you need to just keep an older truck running as a daily driver. Cosmetic Salvage Parts One of the most valuable uses for salvage trucks is as a way to find original equipment to replace something that has worn out on your old truck. Most salvage trucks are in salvage yards because they were involved in an accident that left them unable to operate normally any longer. These trucks still have all of the interior accessories that the make and model was shipped with. The interior of a salvage truck is generally undamaged because most of the damage happens to the front or rear end during an accident. You can find original interior equipment through salvage for far less than you would spend from a retailer. Engine Details Salvage trucks are not the best places to find rubber engine parts like belts or hoses. They are excellent sources of larger parts that may need to be replaced if you have driven your truck for more than 100,000 miles, however. Most salvage trucks have engine blocks that are in perfect condition. A rebuilt engine that begins with a salvaged engine block can cost as little as half as much as an engine rebuilt from retail stock. Since the truck has probably spent years sitting in the salvage yard, the engine block has driven fewer miles than your truck that has been driven regularly for the past several years. Be Prepared to Pull the Parts Yourself If you plan to use salvage trucks to find the parts you need, you should visit the salvage yard with all of the tools you would need to take the parts off of your truck on your own. Part of the reason salvaged parts and accessories are so inexpensive is because the customer does most of the work of retrieving the parts from the salvage vehicle. Wear clothes that you won’t mind getting dirty. It may be a good idea to bring a friend with you if the part you need is heavy.
Finding a Good Copier Repair Service?
Anyone with experience in an office setting can tell you that operating a copier can sometimes be one of the most frustrating things imaginable. Since they're so expensive, companies often use the same copier for years and years, resulting in a whole lot of frustration as the machine becomes older and older. Trying to fix a copier yourself can result in a long day without much being accomplished, so it's important to hire someone that knows exactly what they're doing. This way, you keep the copier running at peak efficiency throughout its life. Finding a copier repair service local to your area is not as difficult as you may think it is. In fact, most electronics retailers offer a copier repair service among a host of other appliance repair services. There are also dedicated office appliance repair businesses that can be easily found and that will offer you the most specialized service for your copier. Both a general electronics repair service and a dedicated office repair service have their pros and cons, but it really just comes down to personal preference and what is most convenient for you. The real differences are found among the businesses themselves, and not among the "types" of businesses. The best thing that you can do is look up a copier repair service in your local area and see what they have to offer. Not only will some of these companies have their own websites that detail their services, but there will also be reviews online from their old customers. These reviews-- if found-- can be worth their weight in gold as you decide on the right copier repair service. The reviews talk about the professionalism and work quality of these businesses, and they're written by customers so they're the most unbiased reviews you'll find. One thing that you can't avoid is depreciation on appliances. Especially if you work in an office environment, these appliances take a lot of punishment on a daily basis, so problems are bound to happen. When they do happen, it is really helpful to have a copier repair service that you can rely on to take care of things.
How do Population One and Population Two stars compare to each other?
Population I stars have more metals (heavier elements), and are generally younger, than the Population II stars. It is postulated that there are still older Population III stars, that have even less metals and are even older, but none have been discovered yet.
