No, there are no clips that have to be removed to take the tail light lens off. There should be 2 torque head screws or phillip head screws, and simply remove them.
what does it mean if my brake light is blinking on and off when its pushed down in my 1999 Chevy silverado
Why not just remove the bad bulb and look see what model it is?
a 2003 Chevy silverado taillight bulb uses a 3157
Open the Driver's door and look at the side of the dash. Remove the side panel panel.
Remove the two screws holding the assembly from inside with tailgate down. Carefully pull and wiggle assembly outward until the two clips release, unplug harness, remove the two 1/4" bulb retainer screws to get at the bulbs. I hope this helps you. Mark
If you mean a low fuel light, then NO.
It should if it is the round body style such as 2001 or 2002.
Most likely the fuse is blown for the dome light on the Silverado if the light doesn't come on.
A Silverado C1500 is a 2WD light truck, K1500 is a 4WD light truck. Please clarify what you mean about the r and the v as I am unfamiliar with that coding.
no it doesnt
problem with the abs, get it fixed
Yes but, if the light is flashing no.