0
A Watt is a unit power. If you put too much power into a device (almost ANY device) it is likely that if you exceed the design (or the practical) limits of the device you will result in some kind of catrostrophic failure.
Whether you are allowed (or permitted) to exceed the design or practical limits of the devivce you are using is up to you.
My personal limit to overdriving machines is 110 percent. Anything else endangers my family's need for my pension.
JCF
What else can I help you with?
What is the largest watt speaker I can put in the trunk of my hatchback?
you can buy speakers from Polk Audio that are rated at 100 watts a piece.
Can you re charge solar powered torch at night?
Of course! Just put it under a 100 watt light bulb
Does a 100 watt dc motor put out 100 watts in reverse?
Yes it can but it is a bit more complicated then that. The motor that is rated at 100 Watts will draw 100 watts electrical power, but will only output 70-80% of that in mechanical power. So in order to get 100 watts back out you would have to put in ~120 watts of mechanical power to get 100 watts electrical back out.
What does a check look like when you write it for 300?
You will put the name of the person or company on the line for it. You will put $300.00 in the box for that. There is a line where you have to write the amount and that will be three hundred and xx/100 (dollars). You can put 00/100 instead of xx/100. Then sign it.
How much energy every second would a 100 watt light bulb use?
A potência de uma lâmpada é medida em watts (W), e essa unidade já representa a quantidade de energia consumida por segundo. Portanto, uma lâmpada de 100 watts consome 100 joules de energia a cada segundo. Em termos mais específicos: 1 watt = 1 joule por segundo. Assim, uma lâmpada de 100 watts consome 100 joules de energia por segundo. Então, se você quer saber a energia consumida por segundo, é exatamente 100 joules.
Can you put a 100 watt equivelant eco bulb in a 65 watt rated receptacle?
Yes, the actual wattage to create similar lumen's to a 100 watt incandescent lamp is around 23 watts in a compact florescent lamp. This being the case the actual draw would only be 23 watts or so and thus well under the 65 watts recommended for your fixture.
Can I put a razor in my carry-on luggage?
No, razors with removable blades are not allowed in carry-on luggage. It is recommended to pack them in checked luggage instead.
Can I put razors in my carry-on luggage?
No, razors with removable blades are not allowed in carry-on luggage. It is recommended to pack them in checked luggage instead.
Is 1500 watts for electric heater a lot?
To put it into perspective a 1000 watt base board heater will heat a 10' x 10' = 100 sq ft room.
Can you put a 7 watt bulb in a 40 watt socket?
Yes if it fits. The 40 watts would be an upper limit.
How do you put in the light bulb in an easybake ultimate oven?
On the back of the oven you will notice a large screw above where the power cord enters the oven...Don't unscrew this one, (although it may make sense). Instead, find the five Phillips head screws, (the ones in a cross pattern) that run along the back edges and unscrew those. From there, you can lift off the back panel which will give you access to the 100 watt lightbulb socket. Remove the old bulb and replace with a 100 watt incandescent bulb. Do not use a 60 watt bulb because it will not be hot enough, or a 120 watt, because it may start a fire. VERY IMPORTANT UPDATE! Don't try to use a compact flourescent bulb (CFL) with a 100 watt output, because the same technology that allows it to save energy is the same that will prevent the oven from heating up. And if you put an LED bulb into the socket, you might as well be calling it the EASY-BAKE Room Temperatureizer.
Can you put a lower 13 watt bulb in a 15 watt lamp?
Yes. Lower wattage would be safe for the lamp wires and components.
