answersLogoWhite

0

rate of corossion is directly proportional to temperature

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What temperature does sulfuric acid cause corrosion in piping?

99F


What has the author Per Kofstad written?

Per Kofstad has written: 'High temperature corrosion' -- subject(s): Corrosion and anti-corrosives, Effect of high temperatures on, Metals


What can accelerate corrosion reactions?

Anodic current; temperature; acid; repeated stress (stress corrosion cracking); water; salts especially chlorides; a dissimilar metal placed in direct contact (galvanic corrosion). Poor painting (pinhole corrosion - concentrates all the anodic current in one small place) and others


What is the effect of temperature on the corrosion of aluminum?

Temperature can accelerate the rate of corrosion of aluminum by increasing the reaction kinetics between the metal and the surrounding environment. Higher temperatures can also lead to the formation of more aggressive corrosion products, such as aluminum oxide, which can further accelerate the corrosion process. It is important to control the temperature to prevent excessive corrosion of aluminum materials.


What environmental conditions are needed for corrosion to occur?

Corrosion occurs when metal is exposed to moisture and oxygen in the environment, leading to a chemical reaction that deteriorates the metal surface. Other factors that can influence corrosion include temperature, pH levels, and the presence of contaminants in the environment. Adequate ventilation and controlled humidity levels can help reduce the likelihood of corrosion.


What is high corrosion?

Chemical deterioration of a material (typically a metal) under very high temperature conditions. This non-galvanic form of corrosion can occur when a metal is subject to a high temperature atmosphere containing oxygen, sulfur or other compounds capable of oxidising (or assisting the oxidation of) the material concerned.


When you turn the key to start your car it turns without starting?

dead battery or corrosion on eletrical connections wet wireing in motor bay if no response corrosion may be problem even if only small amount of corrosion can abstruct normal eletrical functions


Stress corrosion cracking?

Stress corrosion cracking is a form of localized corrosion that will affect metal causing sudden cracks. This forms of corrosion is typical of certain combination of metal-environments. For example Stainless Steel will crak in contact with Chloride at temperature above approx 60°C, Copper when in contact with ammonia or Carbon Steel in contact with Caustic Solutions.


What are the condition required corrosion to take place?

Corrosion requires the presence of a metal, an electrolyte (usually water), and oxygen. Additionally, the metal must be in contact with another metal or material with different electrochemical properties, leading to the flow of electrons and the corrosion process. Temperature, pH, and other environmental factors can also affect the rate and extent of corrosion.


Does rhenium rust?

No, rhenium does not rust. Rusting is a term used specifically to describe the corrosion of iron and its alloys, whereas rhenium is a corrosion-resistant metal often used in high-temperature and extreme environments.


1999 Saturn that won't start It ran fine yesterday Today it won't start you get a puf of white smoke from the engine and dark smoke out the exhaust Car Turns over but doesn't start Any ideas for cause?

Check for trouble codes with a scan tool. I worked on a Saturn that had corrosion on the coolant temperature sensor connector which caused the computer to see too low of temperature and it added excessive fuel to the mix. The car barely ran, hads lots of smoke, the gauge on the dash was erratic and a coolant temperature sensor code was stored in the PCM.


Will hydrochloric acid corrode 316 sTAINLESS?

Hydrochloric acid can corrode 316 stainless steel, especially at high concentrations or elevated temperatures. It is important to use caution when handling hydrochloric acid around stainless steel to prevent damage to the material. Regular cleaning and proper maintenance can help minimize the risk of corrosion.