Yes it can work all b series transmissions bolt patter are the same except the b20A on the ludes
It would never hold together.....
Yes. The transmission from a small block must be at 351 Windsor , And C6 transmission if the transmission is a c4 . It will not work
the ceiling of the store could block transmission
NO it will not even began to work. All together different.
Any Dexron fluid will work fine.
yes it will all b series heads fit idk maybe vtec ones dont though if its a stock ls
No, different bolt pattern to the block.
So long as the engine is a stock small block, yes - bolt that 4L60E to a turbocharged small block or a big block, and you're going to wreck that transmission quick.
Well, depending on what year or years you are talking about, the transfer case should bolt up to the transmissions extension housing. Although I am not sure I would do that as I am 99% sure that a transfer case from a small block application is considerably less durable than one from a big block application unless you have a case from a 3/4 ton pickup that was powered by a small block. But either way as long as you are only trying to interchange the transfer case it should work. If you are trying to interchange the transmission and transfer case as a unit then no it will not work as the big block has a larger bell housing pattern then does a small block on Ford applications.
yes, the 350 block is identical to the 4.3 v6 only short 2 cylinders
that would be a 700 r4. realistically any small block chev transmission will work the 4.3 is a 5.7 with the front 2 cylinders cut off but the 700 r4 is what you need and only a 4x4 one will work.
Most speedometers are run off of the transmission. Something was not correctly put together.