you need to check the fuse,if its ok chack the switch for continuity
if the bulbs are not bad, it is the fuse, if the fuse is good, its the wiring.
cavalier break lights not workin no indicators neither help fuseis gud do i need to change panals were bulbs go or what????????????
If one wire was to break only one of the bulbs on the circuit would stop working whereas if one wire broke on a series circuit all the bulbs would stop working.
If the bulbs are working then you just need to change te fuse.
remove the broken one and replace with a new and working bulbs.
There are many bulbs on a vehicle, need to know which bulbs you want to change.
Change front light bulbs
Check/change the fuse associated with the blinkers.
Your break lights could stop working for several different reasons. First statr by checking your fuses, if they are good then check the bulbs, If both of those things are ok then look to see if your break switch is operating properly, it may be stuck.
1- Check your fuse 2- Check your voltage output to your bulbs 3- Reset your TIPM (remove both connector on your battery for 10 minutes) If nothing work, you can spliced your break hatchback connector (if still working) and connect your brake light... Or change your TIPM.
Phillips screwdriver undo screws take off plastic pannel, Push bulb and turn to get it out. Be careful the bulbs like to break when taking them out.
your break switch on your break pedal.